Boris Derzhavets wrote: > I did several installs on Box2 and succeeded every time for SNV87,89,90 DomUs > at > SNV91 Dom0 . DHCP request took 20-30 sec as maximum. > I did also same attempts on Box1 and every time DHCP request for DomU timed > out. > > It looks like 6703227 is hardware dependent . Per CR xnf gets DHCPOFFER > (PACK ?) > before it gets plumbed and brought up by DomU , but eventually recovers. > Then why it doesn't happen on Box1 (network operates faster and has different > architecture) > xnf never recovers. What is the nic on box1? If you configure it with static IP in domU, can you communicate with outside world? > Moreover if i install DomU with static IP , then > # ifconfig xnf down > # ifconfig xnf unplumb > # ifconfig xnf plumb > # ifconfig xnf dhcp > It hangs .... > This is due to that tx intr is only sent once by xnb to kick off network I/O. So, when you plumb it again, no more intr will be seen, neither rx or tx intr. This is also a problem in 6703227.
Max > All what i can is to bring up xnf with static IP from corresponding subnet. > In this case RTL 8169SC is integrated on the board (vs RTL 8139 plugged into > PCI slot on Box2) as second NIC, first one is Marvell Yukon Gigabit Ethernet. > > > This message posted from opensolaris.org > _______________________________________________ > xen-discuss mailing list > [email protected] > _______________________________________________ xen-discuss mailing list [email protected]
