Ah! Logo! Bought it and waiting for it. Will make protocol if ready!
Thx a lot, so it’s not to be plugged on the mainboard directly, we need an adapter between the 10 pin (not 9 as I thought, but with older my eyes leave their light more and more and listening has been always bad :-) ) Lizbeth > Op 26 aug. 2021, om 17:33 heeft Gerd Hafenbrack <[email protected]> > het volgende geschreven: > > in your picture/foto you tried to put the null modem cable onto the mainboard? > This won't work! > You need something like this (no recommendation, just an example): > https://smile.amazon.de/InLine-33208-DB9-10Pin-Interface-Gender-Adapter/dp/B000MAFOK4 > > <https://smile.amazon.de/InLine-33208-DB9-10Pin-Interface-Gender-Adapter/dp/B000MAFOK4> > The chain should look like this: > mainboard -> DB9/RS-232-Adapter -> slot -> null modem cable -> USB-Adapter -> > receiving USB port at laptop > > Gerd > > On 2021-08-21 17:48, Lizbeth Mutterhunt, Ph.D wrote: >> Epilog: >> ugen2.6: <Prolific Technology Inc. USB-Serial Controller> at usbus2, cfg=0 >> md=HOST spd=FULL (12Mbps) pwr=ON (100mA) >> This is what it looks like on the receiving end at the moment. >> Informed the forum how far we are… but the new null-cable works with the >> port: look at the foto… >> Good for today, why does amazon not deliver faster?, but we can wait, can’t >> we, >> lizbeth >>> Op 21 aug. 2021, om 09:46 heeft Roger Pau Monné <[email protected]> het >>> volgende geschreven: >>> >>> On Fri, Aug 20, 2021 at 06:41:57PM +0200, Lizbeth Mutterhunt, Ph.D wrote: >>>> >>>> >>>>> Op 18 aug. 2021, om 17:11 heeft Roger Pau Monné <[email protected]> het >>>>> volgende geschreven: >>>>> >>>>> On Wed, Aug 18, 2021 at 04:03:34PM +0200, Lizbeth Mutterhunt, Ph.D wrote: >>>>>> Ok, the RS-232 cable arrived yestereday to connect it with my ASUS board >>>>>> shouldn’t be the problem, but how to connect on the other side of a 7 >>>>>> year old Dell Notebook with FreeBSD 14 CURRENT running? I guess I need a >>>>>> USB -> RS232 adapter there, or? And the Raspi would need something like >>>>>> this, too? >>>>> >>>>> Yes, that's what I use, a RS-232 to USB adapter. I've connected the >>>>> adapter to either a laptop or a Raspberry Pi. As long as you have the >>>>> drivers it doesn't really matter what you use on the other end. >>>>> >>>>> Keep in mind the cable between both boxes must be a null modem cable, >>>>> or else it won't work. >>>>> >>>> I can’t connect it onboard, went with skalpell to the white plastic >>>> protection >>> >>> So you are not able to plug the serial header into the motherboard? >>> Sorry, TBH it's not clear to me where you are stuck. >>> >>> Do you have the whole thing setup with all the cables properly >>> connected and it's not working? >>> >>> How are you trying to connect to the serial console on the receive >>> end? >>> >>>> But still no success even when force flag is on! Is this a sign, it is not >>>> a 0-modem-cable. >>>> There are 9 pins, Clear to Send, Ready To Send, Clear to Receive, Ready to >>>> receive RX and DX (switching) and one stop bit and the brown earth pin. >>>> They appear on the board same way, but still they can’t connect. >>>> >>>> Buy another cable or another adapter? >>> >>> FWIW, I tend to use Startech adapters: >>> >>> https://www.amazon.de/StarTech-USB-Seriell-Adapterkabel-Schnittstellen/dp/B00GRP8EZU/ref=sr_1_4?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=startech+usb+serial&qid=1629531611&s=computers&sr=1-4 >>> >>> <https://www.amazon.de/StarTech-USB-Seriell-Adapterkabel-Schnittstellen/dp/B00GRP8EZU/ref=sr_1_4?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=startech+usb+serial&qid=1629531611&s=computers&sr=1-4> >>> >>> <https://www.amazon.de/StarTech-USB-Seriell-Adapterkabel-Schnittstellen/dp/B00GRP8EZU/ref=sr_1_4?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=startech+usb+serial&qid=1629531611&s=computers&sr=1-4 >>> >>> <https://www.amazon.de/StarTech-USB-Seriell-Adapterkabel-Schnittstellen/dp/B00GRP8EZU/ref=sr_1_4?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=startech+usb+serial&qid=1629531611&s=computers&sr=1-4>> >>> >>> And then you also need a null modem cable, like: >>> >>> https://www.amazon.de/StarTech-Null-Modem-Kabel-schwarz/dp/B00QM8ZP5E/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=startech+nullmodem&qid=1629531635&s=computers&sr=1-3 >>> >>> <https://www.amazon.de/StarTech-Null-Modem-Kabel-schwarz/dp/B00QM8ZP5E/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=startech+nullmodem&qid=1629531635&s=computers&sr=1-3> >>> >>> <https://www.amazon.de/StarTech-Null-Modem-Kabel-schwarz/dp/B00QM8ZP5E/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=startech+nullmodem&qid=1629531635&s=computers&sr=1-3 >>> >>> <https://www.amazon.de/StarTech-Null-Modem-Kabel-schwarz/dp/B00QM8ZP5E/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=startech+nullmodem&qid=1629531635&s=computers&sr=1-3>> >>> >>> Sorry for the brand naming. I'm in no way affiliated to Startech, it's >>> just that I find their products more reliable than others, and hence >>> that's what I would recommend. >>> >>> Regards, Roger.
