On Thu, Oct 21, 2021 at 10:48:57PM +0200, Lizbeth Mutterhunt, Ph.D wrote: > /boot/loader.conf: > cuse_load="YES" > kernel_load="YES" > vfs.root.mountfrom="ufs:ada1p6" > #beastie_disable="YES" > hint.hwpstate_intel.0.disabled="1" > set vfs.root.mountfrom.options="rw" > if_bridge_load="YES" > debug.hwpstate_verbose="1" > if_tap_load="YES" > fusefs_load="YES" > xen_kernel="/boot/xen" > xen_cmdline="dom0_mem=4048M dom0_max_vcpus=4 dom0=pvh1 com1=115200,8n1 > guest_loglvl=all loglvl=all" > boot_multicons="YES" > boot_serial="YES" > comconsole_speed="9600" > console="comconsole,efi" *[not accepting any vidconsole]* > boot_verbose="YES" > vga=current > bitmap_name="/boot/splash" > net.link.bridge.inherit_mac=1 > snd_driver_load="YES" > kern.racct.enable=1 > compat.linuxkpi.i915_disable_power_well="0" > > Thanks, Roger. > > > So far, so good, what do you think? will we get this thing to work?
Your xen_cmdline is slightly wrong, it should be: xen_cmdline="dom0_mem=4048M dom0_max_vcpus=4 dom0=pvh com1=9600,8n1 guest_loglvl=all loglvl=all" Note it's dom0=pvh, not pvh1. And the speed of the serial console needs to be adjusted to match the one you are using (9600), or you won't see any output. Also make sure the line is not split by your editor, or else it won't be parsed correctly. Regards, Roger.
