Am Samstag, 8. Dezember 2007 schrieb Philippe Gerum: > Niklaus Giger wrote: > > Hi <...> > I built it like this using the DENX-kernel > > cd /home/hcu/celsius/linux-2.6-xenomai > > /home/hcu/celsius/xenomai-trunk/scripts/prepare-kernel.sh > > --linux=/home/hcu/celsius/linux-2.6-xenomai > > --adeos=/home/hcu/celsius/xenomai-trunk/ksrc/arch/powerpc/patches/adeos-ipipe-2.6.23-powerpc-DENX-2.0-03.patch > > --arch=powerpc > > You need to use adeos-ipipe-2.6.23-ppc-1.6-00.patch for the sequoia > since it still depends on the ppc/ tree, on top of DENX-v2.6.23.8. > Passing --arch=ppc to prepare-kernel.sh instead of --arch=powerpc > without specifying an Adeos patch would pre-select the right one.
However the kernel built this way (based on the git hash given in the patches/README) my sequoia board just hangs after > Bytes transferred = 1633510 (18ece6 hex) > ## Booting image at 00200000 ... > Image Name: Linux-2.6.23.8-dirty > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 1633446 Bytes = 1.6 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > Uncompressing Kernel Image ... OK Best regards -- Niklaus Giger _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
