Am Samstag, 8. Dezember 2007 schrieb Philippe Gerum: > Niklaus Giger wrote: > > Am Samstag, 8. Dezember 2007 schrieb Philippe Gerum: > >> Niklaus Giger wrote: > >>> Hi > > <...> > >> I built it like this using the DENX-kernel > >>> cd /home/hcu/celsius/linux-2.6-xenomai > >>> /home/hcu/celsius/xenomai-trunk/scripts/prepare-kernel.sh > >>> --linux=/home/hcu/celsius/linux-2.6-xenomai > >>> --adeos=/home/hcu/celsius/xenomai-trunk/ksrc/arch/powerpc/patches/adeos-ipipe-2.6.23-powerpc-DENX-2.0-03.patch > >>> --arch=powerpc > >> You need to use adeos-ipipe-2.6.23-ppc-1.6-00.patch for the sequoia > >> since it still depends on the ppc/ tree, on top of DENX-v2.6.23.8. > >> Passing --arch=ppc to prepare-kernel.sh instead of --arch=powerpc > >> without specifying an Adeos patch would pre-select the right one. > > > > However the kernel built this way (based on the git hash given in the > > patches/README) my sequoia board just hangs after > > Mm, entering the twilight zone? Here is the configuration which works here: > > CPU: AMCC PowerPC 440EPx Rev. A at 528 MHz (PLB=132, OPB=66, EBC=66 MHz) > ... > Board: Sequoia - AMCC PPC440EPx Evaluation Board, Rev. F, PCI=66 MHz > > $ type ppc_4xxFP-gcc > ppc_4xxFP-gcc is /opt/eldk-4.1/usr/bin/ppc_4xxFP-gcc > (works with 4.0 and latest the same way). > > From a cloned Denx's GIT baseline: > $ git checkout -b sequoia 208aa3df8645608ff3febb65f83219173dfe4979 > $ ~/xenomai-trunk/scripts/prepare-kernel.sh --arch=ppc --linux=. > ... accept the default suggestion, i.e. adeos-ipipe-2.6.23-ppc-1.6-00 > $ make ARCH=ppc CROSS_COMPILE=ppc_4xxFP-gcc sequoia_defconfig > ... use all default Xenomai options > $ make ARCH=ppc CROSS_COMPILE=ppc_4xxFP-gcc [uImage] > Pretty the same here.
Which U-Boot version do you use? Here: U-Boot 1.3.0 (Nov 27 2007 - 08:49:04) Thanks in advance. -- Niklaus Giger _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
