Hello, rakesh bk wrote: > Hello Everyone > > I am new to Xenomai , I have ported linux-2.6.14 to our custom board based > on IBM750Cxe Iam unable to boot my kernel cross compiled with > eldk-3.0 with > enabled xenomai support.If i remove xenomai and ipipe support the > kernel > boots correctly , but if i enable i get the following oops message . > The following patches are applied and arguements of scripts/prepare- > kernel.sh is mentioned as follows > adeos-ipipe-2.6.14-ppc-1.3-05.patch, > Target architecture [default i686]: ppc > Adeos patch[default linux-2.6.14/xenomai-2.2.0 > /ksrc/arch/powerpc/patches > /adeos-ipipe-2.6.14-ppc64-1.2-03.patch]: > adeos-ipipe-2.6.14-ppc-1.3-05.patch, > > Xenomai: ALTIVEC support enabled in kernel but no hardware found. > Disable CONFIG_ALTIVEC in the kernel configuration.
Please disable CONFIG_ALTIVEC in your kernel configuration as suggested by the boot message above. Any chance to switch to a more recent version of Linux and Xenomai? Wolfgang. _______________________________________________ Xenomai-help mailing list Xenomai-help@gna.org https://mail.gna.org/listinfo/xenomai-help