Hello, I'm gonna try it right now, disable l-pipe and recompile.
I'm trying to use this feature, by running 'cpufreq-set' and setting the frequency myself but, didnt work too. ==== r...@phall:/home/phall# cpufreq-set -f 3.0Ghz No cpufreq support r...@phall:/home/phall# ==== Let's see what happen. I really thank you all for the attention. Att. Alexandre 2011/1/3 Philippe Gerum <[email protected]> > On Mon, 2011-01-03 at 16:29 +0100, Philippe Gerum wrote: > > On Mon, 2011-01-03 at 13:20 -0200, Alexandre Oliveira wrote: > > > In attachment: > > > > > > .config file from my kernel 2.6.34.1 > > > and the complete dmesg file. > > > > > > I already updated the BIOS version of the mother board... but the same > > > problem occurs. > > > The /proc/cpuinfo file still returns 0.000 of frequency. > > > > Then you should send this report to the linux kernel folks. > > ... after having disabled Xenomai and the I-pipe, that is. Since there > is calibration involved, make sure to try again without I-pipe, and > report upstream only if /proc/cpuinfo still displays a null frequency. > > > > > > > > > ======== > > > r...@phall:/usr/xenomai/share/xenomai/testsuite/latency# ./run > > > * > > > * > > > * Type ^C to stop this application. > > > * > > > * > > > Xenomai: /dev/rtheap is missing > > > (chardev, major=10 minor=254) > > > > > > ============ > > > > > > ==== > > > processor : 0 > > > vendor_id : GenuineIntel > > > cpu family : 15 > > > model : 4 > > > model name : Intel(R) Pentium(R) 4 CPU 3.00GHz > > > stepping : 3 > > > cpu MHz : 0.000 > > > cache size : 2048 KB > > > fdiv_bug : no > > > hlt_bug : no > > > f00f_bug : no > > > coma_bug : no > > > fpu : yes > > > fpu_exception : yes > > > cpuid level : 5 > > > wp : yes > > > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge > > > mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm > > > constant_tsc up pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr > > > bogomips : 1495.04 > > > clflush size : 64 > > > cache_alignment : 128 > > > address sizes : 36 bits physical, 48 bits virtual > > > power management: > > > > > > ======= > > > > > > Any other file? > > > > > > Thanks again for helping. :) > > > > > > Att. > > > Alexandre. > > > > > > > > > > > > 2011/1/1 Gilles Chanteperdrix <[email protected]> > > > Alexandre Oliveira wrote: > > > > Hello, > > > > > > > > I'm not running linux from a vmware. I didn't see that point > > > of the topic... > > > > > > > > > > > > On Monday, I will be at the laboratory and I will send the > > > complete dmesg > > > > file for help. > > > > > > > > > Please also send us the full kernel configuration. > > > > > > -- > > > > > > Gilles. > > > > > > _______________________________________________ > > > Xenomai-help mailing list > > > [email protected] > > > https://mail.gna.org/listinfo/xenomai-help > > > > -- > Philippe. > > >
_______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
