Hi,
I'm trying to make a NI-6220 acquisition board working with xenomai on a
x86_64 patched kernel, but I'm getting the following error when I try to
attach the device with the command:
/usr/xenomai/sbin/analogy_config analogy0 analogy_ni_pcimio 0xc,5
The error is:
analogy_config: attach failed err=-2
I know that Xenomai is working well since I can run all the examples
(latency, etc...).
The dmesg command gave me only this error:
[ 69.926138] Analogy: a4l_assign_driver: call(drv->attach) failed (ret=-2)
Thi is the lspci output for the board:
0c:05.0 Unassigned class [ff00]: National Instruments PCI-6220
I also checked for shared IRQ, it seems there is no IRQ sharing with
other devices and I also tried to change the PCI slot without success.
Any help is appreciated
_______________________________________________
Xenomai mailing list
[email protected]
http://www.xenomai.org/mailman/listinfo/xenomai
