Anyone else has any suggestions? At least a hint on how to find where is
the problem?

Thanks
Il giorno 06/giu/2012 11:13, "Danilo De Lorenzo" <
[email protected]> ha scritto:

>  Thanks Hadrien,
> I've already enabled the analogy driver in the kernel configuration and
> this is confirmed since I have all the analogy and ni modules loaded...
>
> Danilo De Lorenzo, PhD
> NearLab - Bioengineering Department
> Politecnico di Milano, via Colombo 40, 20133 Milan, Italywww.nearlab.polimi.it
>
> email: [email protected]
> phone: +39 02-2399-9013
> fax: +39 02-2399-9003
>
>
> On 06/06/2012 10:51 AM, Hadrien Caron wrote:
>
> Hello Danilo,
>
> I am no expert, but I had a similar issue when I forgot to enable the
> analogy driver
> in the kernel configuration (through menuconfig for example).
>
> hope it helps,
>
> Hadrien
>
>  On Wed, Jun 6, 2012 at 10:07 AM, Danilo De Lorenzo <
> [email protected]> wrote:
>
>> Hi,
>> I'm trying to make a NI-6220 acquisition board working with xenomai on a
>> x86_64 patched kernel, but I'm getting the following error when I try to
>> attach the device with the command:
>>
>> /usr/xenomai/sbin/analogy_config analogy0 analogy_ni_pcimio 0xc,5
>>
>> The error is:
>> analogy_config: attach failed err=-2
>>
>> I know that Xenomai is working well since I can run all the examples
>> (latency, etc...).
>>
>> The dmesg command gave me only this error:
>> [   69.926138] Analogy: a4l_assign_driver: call(drv->attach) failed
>> (ret=-2)
>>
>>
>> Thi is the lspci output for the board:
>>
>> 0c:05.0 Unassigned class [ff00]: National Instruments PCI-6220
>>
>> I also checked for shared IRQ, it seems there is no IRQ sharing with
>> other devices and I also tried to change the PCI slot without success.
>>
>> Any help is appreciated
>>
>>
>>
>> _______________________________________________
>> Xenomai mailing list
>> [email protected]
>> http://www.xenomai.org/mailman/listinfo/xenomai
>>
>
>
_______________________________________________
Xenomai mailing list
[email protected]
http://www.xenomai.org/mailman/listinfo/xenomai

Reply via email to