Hi Gilles, On git under tags, the latest version of Xenomai is 2.6.2.1 (5 months ago), and I think that is the same version I use.
Could you give me the direct link to get the latest version of xenomai, please ? I have a question about the images put on the target : I took the rootfs and the u-boot from LTIB, and took only the uImage from : build_root/linux/arch/arm/boot/uImage Is this right ? And is there something else to do ? To put the patched kernel with Xenomai on the target. Regards, Younes CHALABI ________________________________________ De : Gilles Chanteperdrix [[email protected]] Date d'envoi : mardi 9 juillet 2013 13:21 À : Younes CHALABI Cc : [email protected] Objet : Re: [Xenomai] No boot kernel with xenomai on i.MX6Q Sabrelite On 07/09/2013 12:40 PM, Younes CHALABI wrote: > Hi to all, > > I am currently trying to deploy Xenomai-2.6.2.1 patched to Linux-3.0.35 > (Freescale Release) on the i.MX6Q Sabrelite board. > > I followed this procedure for the installation : > http://www.xenomai.org/documentation/xenomai-2.6/html/README.INSTALL/#arm > > When I boot the target with an microSD card, the kernel starts to > uncompressing but at one moment stops at this line : Switching to clocksource > ipipe_tsc ; and nothing happens after. > > Any suggestion will be welcome. Could you try with the latest version from xenomai git instead of 2.6.2.1? -- Gilles. _______________________________________________ Xenomai mailing list [email protected] http://www.xenomai.org/mailman/listinfo/xenomai
