On 07/10/2013 03:00 PM, Younes CHALABI wrote:
Hi Gilles,
I followed your advice, using the xenomai-master, but now the kernel not boot
also. It stops at :
## Booting kernel from Legacy Image at 10800000 ...
Image Name: Linux-3.0.15
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3825732 Bytes = 3.6 MB
Load Address: 10008000
Entry Point: 10008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
You already asked this question, it was answered here:
http://www.xenomai.org/pipermail/xenomai/2013-June/028760.html
Sorry for disturbing you, but it's been a month since I still can not run
xenomai on the Sabrelite board. Now I need concise answers :
1- Did you already used Xenomai on the Sabrelite board ?
>
2- Which kernel | xenomai version and patches for the Sabrelite board ?
You already asked these questions, they were answered here:
http://www.xenomai.org/pipermail/xenomai/2013-April/028137.html
3- After the build I've got two folders :
1) build_root contains : linux and xenomai
2) staging_dir contains : dev and usr
All I do to transfer the images is :
1) Take U-BOOT from LTIB
2) Take ROOTFS from LTIB
3) Take KERNEL (uImage) from build_root/linux/arch/arm/boot
Are these files all I need to have, to run Xenomai on the Sabrelite board ?
>
Or I still have to do something ?
You manage how you want, but if you want to run examples on the board,
they have to find the xenomai libraries and device nodes. As already
answered, there is more than one way to do it.
http://www.xenomai.org/pipermail/xenomai/2013-June/028749.html
--
Gilles.
_______________________________________________
Xenomai mailing list
[email protected]
http://www.xenomai.org/mailman/listinfo/xenomai
