Hi,
so I've been searching google for a while now and the results haven't been
helping.
i tried setserial /dev/ttyS0 , i get the typical io=0x3f8, IRQ=4
i set uart to none, and my normal serial programs with my device don't read
anything as expected
i did /sbin/modprobe xeno_16550A \
io=0x3f8 \
irq=4 \
baud_base=115200
and modprobe xeno_16......
and sudo and all the permutations possible
i dont get nay mesasge back, but when i run cross-link it still gives me the
same error, main : can't open rtser0 (write)
im not sure if im loading the xenomai driver right, is there something im
missing?
my lsmod DOES NOT show any of these
# lsmod
Module Size Used by
xeno_16550A 12392 0
xeno_rtdm 23460 1 xeno_16550A
xeno_native 114384 0
xeno_nucleus 82696 3 xeno_16550A,xeno_rtdm,xeno_native
xeno_hal 23616 4
http://www.acadis.org/pages/captain.at/serial-port-example
makefile does not work for me
http://www.acadis.org/pages/captain.at/xeno-16550A
i don't have a directory in /usr/realtime/
anyone have any ideas or suggesitons or recommendation of alcohol?
_______________________________________________
Xenomai mailing list
[email protected]
http://www.xenomai.org/mailman/listinfo/xenomai
