On 09/22/2014 11:11 PM, bob wrote: > Hi, > so I've been searching google for a while now and the results haven't been > helping. > > i tried setserial /dev/ttyS0 , i get the typical io=0x3f8, IRQ=4 > > i set uart to none, and my normal serial programs with my device don't read > anything as expected > > i did /sbin/modprobe xeno_16550A \ > io=0x3f8 \ > irq=4 \ > baud_base=115200 > > and modprobe xeno_16...... > > and sudo and all the permutations possible > > i dont get nay mesasge back, but when i run cross-link it still gives me the > same error, main : can't open rtser0 (write) > > im not sure if im loading the xenomai driver right, is there something im > missing? > > my lsmod DOES NOT show any of these > # lsmod > Module Size Used by > xeno_16550A 12392 0 > xeno_rtdm 23460 1 xeno_16550A > xeno_native 114384 0 > xeno_nucleus 82696 3 xeno_16550A,xeno_rtdm,xeno_native > xeno_hal 23616 4
Well, did you compile the module? Or is it builtin? > > http://www.acadis.org/pages/captain.at/serial-port-example > makefile does not work for me > > http://www.acadis.org/pages/captain.at/xeno-16550A > i don't have a directory in /usr/realtime/ These pages are outdated. Xenomai 2.2 dates back from 9 years ago. > > anyone have any ideas or suggesitons or recommendation of alcohol? Maybe you could try the xenomai.org documentation: http://xenomai.org/serial-16550a-driver/ -- Gilles. _______________________________________________ Xenomai mailing list [email protected] http://www.xenomai.org/mailman/listinfo/xenomai
