张立鑫 wrote: > https://github.com/raspberrypi/linux > > git reset --hard 43f497a2035f3d4a2f766d20827c68e0437cdd58 > > use > https://github.com/raspberrypi/linux/blob/rpi-3.18.y/arch/arm/configs/bcm2709_defconfig > > $ export > PATH=$PATH:~/raspberrypi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin > $ export CCPI=arm-linux-gnueabihf- > $ KERNEL=kernel7 > $ mkdir build > $ make mrproper > $ make ARCH=arm O=build CROSS_COMPILE=$CCPI bcm2709_defconfig > $ make ARCH=arm O=build CROSS_COMPILE=$CCPI menuconfig > > enabled ipipe
It is not obvious at this point how you got the I-pipe patch for that processor. The git you use is not a git supported by the Xenomai project, as such we have no information about it. And the list of processors supported by Xenomai (not by third parties gits obviously) may be found here: http://xenomai.org/embedded-hardware/#Supported_SoC -- Gilles. https://click-hack.org _______________________________________________ Xenomai mailing list [email protected] http://xenomai.org/mailman/listinfo/xenomai
