On 16-03-14 12:47 AM, Nicolas SCHURANDO wrote: > Hi Mosta, > > I have written a quick guide to get Xenomai 3.0 on the Raspberry Pi 2 > working at https://www.raspberrypi.org/forums/viewtopic.php?p=926466#p926466 > . > > It relies on a post patch written by a member of the mailing list a few > month ago. > > I however find the system to be very unstable so I would love to hear some > feedback from you, especially if your system freezes or not. > > Hope this helps. > > Regards, > > Nicolas > > 2016-03-14 0:16 GMT+01:00 mosta <mosta...@googlemail.com>: > >> Hallo everyone, >> >> I try to compile the current stable release of xenomai for the raspberry >> pi2. I found a linuxcnc installation guide for xenomai 2.6.1 >> (http://wiki.linuxcnc.org/cgi-bin/wiki.pl?RaspbianXenomaiBuild) and I >> compiled on image with it, so I use it as a template to compile >> xenomai-3.0.1 and the problem I found is that there are pre- and post >> patches for the raspberry pi and I can't find any for xenomai-3.0.1 are >> they not needed or do I have to create them myself? >> >> tips and hints for moving forward are welcome. >> >> greetings mosta >> >> _______________________________________________ >> Xenomai mailing list >> Xenomai@xenomai.org >> https://xenomai.org/mailman/listinfo/xenomai >> > _______________________________________________ > Xenomai mailing list > Xenomai@xenomai.org > https://xenomai.org/mailman/listinfo/xenomai >
Thanks Nicolas for taking the time to write the guide. I have not looked at the problem but there is port to the 4.1 kernel from Philippe Gerum here: http://git.xenomai.org/ipipe.git/log/?h=vendors/raspberry/ipipe-4.1 It is likely more up to date than mine. Regards, -Mathieu _______________________________________________ Xenomai mailing list Xenomai@xenomai.org https://xenomai.org/mailman/listinfo/xenomai
