On Mon, Apr 18, 2016 at 5:30 PM, Lennart Sorensen <[email protected]> wrote: > On Mon, Apr 18, 2016 at 05:28:26PM +0300, Ran Shalit wrote: >> On Mon, Apr 18, 2016 at 4:56 PM, Ran Shalit <[email protected]> wrote: >> > On Mon, Apr 18, 2016 at 4:54 PM, Lennart Sorensen >> > <[email protected]> wrote: >> >> On Mon, Apr 18, 2016 at 04:47:46PM +0300, Ran Shalit wrote: >> >>> Is there a link to that patch ? I would like to try it in my kernel. >> >>> We can't upgrade the kernel at this point, so we must use (3.12). >> >> >> >> Well I put my patches on one of my web pages: >> >> >> >> http://csclub.uwaterloo.ca/~lsorense/xenomai-3.12/ >> >> >> >> At least that might give you a starting point. >> >> >> >> That is that last version of the patch before we moved to 3.14. >> >> >> >> -- >> >> Len Sorensen >> > >> >> >> Hi Len, >> >> One more on this, if I may. >> The kernel I am using is 3.12.0, >> Does it mean that the patch (3.12.31) can be applied on 3.12.0 kernel >> ( or can it only be applied on 3.12.31 kernel) ? > > I used 3.12.31, but it should be very minor tweaking to get it on 3.12.0. > > -- > Len Sorensen
Hi Lan, We intend to use ipipe with zynq (we already have 3.12.0 kernel used with zynq). Do you think the patch should be relevant for zynq ? I see that xilinx have their own patch , but it is for older kernel 2.6.3 http://www.wiki.xilinx.com/Xenomai+for+Zynq#Xenomai for Zynq-7000 AP SoC Linux--Patch I also see that in git there is ipipe for 3.12.0 http://git.xenomai.org/ipipe-gch.git/log/?h=raw/for-ipipe-3.12.0 But again I am unsure if it is relevant for zynq too. Thank you for the time, Ran _______________________________________________ Xenomai mailing list [email protected] https://xenomai.org/mailman/listinfo/xenomai
