Thanks for your answer. I can built it so far but I get many warnings that it cannot fetch tar-files from rpm5.org as this site is no longer available. Do you have any suggestions? Thanks.
Daniel Am Mi., 31. Juli 2019 um 10:22 Uhr schrieb Josef Holzmayr < holzm...@rsi-elektrotechnik.de>: > On Wed, Jul 31, 2019 at 09:59:41AM +0200, danwe wrote: > > Thanks for the setup. Sorry for asking but as I am new to that topic I > > don't understand how to use that site u sent me. Do I have to download > > Xenomai 3 first and then copy/paste the files on your site? I don't > really > > understand the readme file. > > For example: In the readme file I see the following: > > > > > > > > After adding meta-core and a BSP layer (right now there's only > meta-beaglebone > > available, so probably that one!), build the xenomai-test-image. > > > > > > So now I ask myself. Where should I add meta-core and meta-beaglebone to > > and how can I build the xenomai-test-image then? > > I don't understand the dependencies. > > Its a completely generic OpenEmbedded build setup. If you're not used to > doing so, just go to readme item IV: Using kas. Then it essentially > boils down to the three commands given there verbatim, just needing > docker to be available as well as quite some HD space and CPU cycles. > > > > > Thanks. > > > > Daniel > > > > Am Mi., 31. Juli 2019 um 09:01 Uhr schrieb Josef Holzmayr < > > holzm...@rsi-elektrotechnik.de>: > > > > > On Wed, Jul 31, 2019 at 08:50:18AM +0200, danwe via Xenomai wrote: > > > > Thanks for your response. Maybe it was a bit unclear from my side: > > > > I need to build the Kernel and Xenomai 3. So I do neither want to > build > > > the > > > > kernel and userland tools on top of an existing image nor building > > > anything > > > > on top. Or what do you mean by building on top? Is there anything > > > "deeper" > > > > than a Kernel? > > > > And again: Does building a Kernel with Xenomai 3 depends on the > paltform > > > I > > > > want to use it on? I need to use it on a BeagleBone Black. Do I have > to > > > > change anything for use it on BBB? > > > > Thanks. > > > > > > You could use the setup I employ for doing the CIP kernel tests. All > > > nicely prepared for Xenomai 3 and BBB, only thing you'd have to swap > out > > > is the kernel itself which is not too complicated. > > > > > > https://github.com/LetoThe2nd/meta-xenomai > > Greetz > > -- > ——————————————— > Josef Holzmayr > Software Developer Embedded Systems > > Tel: +49 8444 9204-48 > Fax: +49 8444 9204-50 > > R-S-I Elektrotechnik GmbH & Co. KG > Woelkestrasse 11 > D-85301 Schweitenkirchen > www.rsi-elektrotechnik.de > ——————————————— > Amtsgericht Ingolstadt – GmbH: HRB 191328 – KG: HRA 170393 > Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg > Ust-IdNr: DE 128592548 > > _____________________________________________________________ > Amtsgericht Ingolstadt - GmbH: HRB 191328 - KG: HRA 170363 > Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg > USt-IdNr.: DE 128592548 > >
