That worked. Thank you much. On Thu, Jun 12, 2003 at 02:14:47PM -0400, Mark Vojkovich wrote:
> > Oh, your modes have different names. Your modeline is called > "[EMAIL PROTECTED]", but you refer to "1920x1200" in the Modes of the > Subsection "Display". Specify "[EMAIL PROTECTED]" instead of "1920x1200" > or change the name of the Modeline to "1920x1200". > > > Mark. > > On Thu, 12 Jun 2003, Eric Humphries wrote: > > > I appreciate you looking at that for me. I made the specified changes and I'm > > still running in 4:3. So I changed my modes for my default color depth to the > > resolution i want ([EMAIL PROTECTED]) and attempted to start x. If you could > > glance at my config and log again and see if you notice anything I'm overlooking > > it would be greatly appreciated. > > > > http://marley.bitstream.net/~hump/XF86Config2.txt > > http://marley.bitstream.net/~hump/XFree86.0.log2.txt > > > > I left my old log/config in place in case you would like to reference it again. > > > > Thanks in advance > > Eric > > > > On Wed, Jun 11, 2003 at 04:01:59PM -0400, Mark Vojkovich wrote: > > > > > > > > Your XF86Config specifies that your panel will only sync > > > to 75.67 KHz horizontal syncs. I'm not sure what rounding > > > and to what accuraccy the server makes checks against this, > > > but it throws out all modes except for one due to that restriction. > > > > > > The panels are multisync and probably about 30-80 KHz horizontal > > > and about 50-70 Hz vertical are more accurate. Your "[EMAIL PROTECTED]" > > > modeline should work if you set your HorizSync and VertRefresh > > > ranges to those. > > > > > > > > > Mark. > > > > > > On Wed, 11 Jun 2003, Eric Humphries wrote: > > > > > > > I have an Inspiron 8500 and I'm trying to get x to change aspect ratios to > > > > better fit my lcd. Currently its running in 4/3 properly with no issues > > > > whatsoever. I'm using the stock nv driver in x 4.3.0. > > > > > > > > View my Config at: > > > > http://marley.bitstream.net/~hump/XF86Config.txt > > > > > > > > View my log at: > > > > http://marley.bitstream.net/~hump/XFree86.0.log.txt > > > > > > > > relevant dmesg output: > > > > pci1: <PCI bus> on pcib1 > > > > pci1: <NVidia model 0286 graphics accelerator> at 0.0 irq 11 > > > > agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xefffffff at device 0.0 > > > > on pci0 > > > > > > > > My lcd does 6/10 aspect in windows xp, however my attempts to modify the > > > > modeline to something using 6/9 or 6/10 seem to be failing. Let me know if I'm > > > > overlooking something. > > > > > > > > -- > > > > Eric Humphries > > > > > > > > _______________________________________________ > > > > XFree86 mailing list > > > > [EMAIL PROTECTED] > > > > http://XFree86.Org/mailman/listinfo/xfree86 > > > > > > > > > > > -- > > Eric Humphries > > Bitstream Underground > > 612-642-8530 > > > > > -- Eric Humphries Bitstream Underground 612-642-8530 _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86