XFree86 4.3.0 + mga from Matrox
I never noticed a remark for which XFree version it was build but than again.
The source is also available.
Marcel
#
# History:
# E.M. Stegehuis | V1.0
#
#
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Screen 3 "Screen3" RightOf "Screen2"
Screen 4 "Screen4" RightOf "Screen3"
Screen 5 "Screen5" RightOf "Screen4"
# Two more screens are possible
# Screen 6 "Screen6" RightOf "Screen5"
# Screen 7 "Screen7" RightOf "Screen6"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
# Disable control-alt-backspace to kill the XServer.
Option "DontZap" "yes"
# Disable control-alt-Fn to switch to a virtual terminal
# Option "VTSysReq" "yes"
# for 4.3.0 Option "DontVTSwitch" "yes"
# Option "RenderColormapMode" "mono"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
# We get the fonts from the fontserver.
FontPath "unix/:7100"
# It is also possible to get them from
# disk directly.
EndSection
Section "Module"
# What we do not use can not crash...
# Load "extmod"
# Load "dbe"
# Load "dri"
# Load "glx"
# Load "record"
# Load "xtrap"
# Load "speedo"
# Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "EIZ"
ModelName "Eizo FlexScan T57S"
HorizSync 30.0-92.0
VertRefresh 50.0-160.0
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "EIZ"
ModelName "Eizo FlexScan T57S"
HorizSync 30.0-92.0
VertRefresh 50.0-160.0
EndSection
Section "Monitor"
Identifier "Monitor3"
VendorName "EIZ"
ModelName "Eizo FlexScan T57S"
HorizSync 30.0-92.0
VertRefresh 50.0-160.0
EndSection
Section "Monitor"
Identifier "Monitor4"
VendorName "EIZ"
ModelName "Eizo FlexScan T57S"
HorizSync 30.0-92.0
VertRefresh 50.0-160.0
EndSection
Section "Monitor"
Identifier "Monitor5"
VendorName "EIZ"
ModelName "Eizo FlexScan T57S"
HorizSync 30.0-92.0
VertRefresh 50.0-160.0
EndSection
Section "Monitor"
Identifier "Monitor6"
VendorName "EIZ"
ModelName "Eizo FlexScan T57S"
HorizSync 30.0-92.0
VertRefresh 50.0-160.0
EndSection
Section "Monitor"
Identifier "Monitor7"
VendorName "EIZ"
ModelName "Eizo FlexScan T57S"
HorizSync 30.0-92.0
VertRefresh 50.0-160.0
EndSection
Section "Monitor"
Identifier "Monitor8"
VendorName "EIZ"
ModelName "Eizo FlexScan T57S"
HorizSync 30.0-92.0
VertRefresh 50.0-160.0
EndSection
#==============================
# The first card
#==============================
#
# HWCursor = no -- to prevent the cursor having
# very odd shapes
#
Section "Device"
Option "HWcursor" "off"
# Option "NoAccel"
# Option "MGASDRAM"
Identifier "Card1_1"
Driver "mga"
VendorName "Matrox"
BoardName "MGA G200 AGP"
BusID "PCI:3:0:0"
EndSection
Section "Device"
Option "HWcursor" "off"
# Option "NoAccel"
# Option "MGASDRAM"
Identifier "Card1_2"
Driver "mga"
VendorName "Matrox"
BoardName "MGA G200 AGP"
BusID "PCI:3:4:0"
EndSection
Section "Device"
Option "HWcursor" "off"
# Option "NoAccel"
# Option "MGASDRAM"
Identifier "Card1_3"
Driver "mga"
VendorName "Matrox"
BoardName "MGA G200 AGP"
BusID "PCI:3:8:0"
EndSection
Section "Device"
Option "HWcursor" "off"
# Option "NoAccel"
# Option "MGASDRAM"
Identifier "Card1_4"
Driver "mga"
VendorName "Matrox"
BoardName "MGA G200 AGP"
BusID "PCI:3:12:0"
EndSection
#==========================
# The second card
#==========================
#
# NoAccel -- to prevent garbage squares on the screen.
# HWCursor = no -- to prevent the cursor having
# very odd shapes
#
Section "Device"
Option "HWcursor" "off"
# Option "NoAccel"
# Option "MGASDRAM"
Identifier "Card2_1"
Driver "mga"
VendorName "Matrox"
BoardName "MGA G200 AGP"
BusID "PCI:4:0:0"
EndSection
Section "Device"
Option "HWcursor" "off"
# Option "NoAccel"
# Option "MGASDRAM" "yes"
Identifier "Card2_2"
Driver "mga"
VendorName "Matrox"
BoardName "MGA G200 AGP"
BusID "PCI:4:4:0"
EndSection
Section "Device"
Option "HWcursor" "off"
# Option "NoAccel"
# Option "MGASDRAM" "yes"
Identifier "Card2_3"
Driver "mga"
VendorName "Matrox"
BoardName "MGA G200 AGP"
BusID "PCI:4:8:0"
EndSection
Section "Device"
Option "HWcursor" "off"
# Option "NoAccel"
# Option "MGASDRAM" "yes"
Identifier "Card2_4"
Driver "mga"
VendorName "Matrox"
BoardName "MGA G200 AGP"
BusID "PCI:4:12:0"
EndSection
#==============================================
# Screens
#==============================================
Section "Screen"
Identifier "Screen0"
Device "Card1_1"
Monitor "Monitor1"
# DefaultDepth 8
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1_2"
Monitor "Monitor2"
# DefaultDepth 8
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Card1_3"
Monitor "Monitor3"
# DefaultDepth 8
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen3"
Device "Card1_4"
Monitor "Monitor4"
# DefaultDepth 8
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen4"
Device "Card2_1"
Monitor "Monitor5"
# DefaultDepth 8
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen5"
Device "Card2_2"
Monitor "Monitor6"
# DefaultDepth 8
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen6"
Device "Card2_3"
Monitor "Monitor7"
# DefaultDepth 8
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen7"
Device "Card2_4"
Monitor "Monitor8"
# DefaultDepth 8
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
EndSection
>-- Oorspronkelijk bericht --
>From: Bill Mania <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Reply-To: [EMAIL PROTECTED]
>Subject: [XFree86] Using Matrox G400 in dual-head mode with XFree86 4.3.0
>Date: Thu, 15 Jan 2004 14:07:02 -0600
>
>
>I would like to use a single Matrox G400 PCI AGP interface with two
monitors and XFree86 4.3.0 on a Linux 2.4.20 system. Is this
configuration supported?
When I adjust the configuration of /etc/X11/XF86Config, and reference
the usual mga driver (
>river "mga" in the "Device" section), the X
server will start but tells me that I must use the mga_hal driver.
I have retrieved the file mga_hal_drv.o from www.matrox.com, installed
it and restarted the X server. The latest version of mga_hal appe
>rs
to be built for XFree86 4.2.0. Must the mga_hal_drv.o be built
specifically for XFree86 4.3.0 in order to be usable?
Where can I find an example of XF86Config and a copy of mga_hal_drv
which will support two monitors on one G400 interface for
>Free86
4.3.0?
--
Bill Mania
dum vivimus vivamus
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
