Davide, I have had to turn on smartdnshost again. After having an error-free run for quite a while, this morning I see errors. Investigation shows.
Issue 1: --------- -> Partial Bounce email content: (I've swapped @ for *) ID: <S347B1> Mail From: <stkilda*nzn.com.au> Rcpt To: <sjellis*optusnet.com.au> Server: <www.optusnet.com.au> [211.29.132.105] ErrCode = -217 ErrString = Error connecting to remote address -> DIG results Notice that the MX results are ignored and sending to the A result is attempted. C:\>dig optusnet.com.au mx ; <<>> DiG 9.2.3 <<>> optusnet.com.au mx ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 41 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 3 ;; QUESTION SECTION: ;optusnet.com.au. IN MX ;; ANSWER SECTION: optusnet.com.au. 86400 IN MX 50 mail.optusnet.com.au. ;; AUTHORITY SECTION: optusnet.com.au. 37130 IN NS ns2.optusnet.com.au. optusnet.com.au. 37130 IN NS ns1.optusnet.com.au. ;; ADDITIONAL SECTION: mail.optusnet.com.au. 86400 IN A 211.29.132.250 ns1.optusnet.com.au. 37130 IN A 203.2.75.2 ns2.optusnet.com.au. 37130 IN A 203.2.75.12 ;; Query time: 46 msec ;; SERVER: 10.90.10.151#53(ns1) ;; WHEN: Tue Apr 17 08:37:34 2007 ;; MSG SIZE rcvd: 138 C:\>dig optusnet.com.au a ; <<>> DiG 9.2.3 <<>> optusnet.com.au a ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 41 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2 ;; QUESTION SECTION: ;optusnet.com.au. IN A ;; ANSWER SECTION: optusnet.com.au. 37147 IN A 211.29.132.105 ;; AUTHORITY SECTION: optusnet.com.au. 37099 IN NS ns1.optusnet.com.au. optusnet.com.au. 37099 IN NS ns2.optusnet.com.au. ;; ADDITIONAL SECTION: ns1.optusnet.com.au. 37099 IN A 203.2.75.2 ns2.optusnet.com.au. 37099 IN A 203.2.75.12 ;; Query time: 15 msec ;; SERVER: 10.90.10.151#53(ns1) ;; WHEN: Tue Apr 17 08:38:04 2007 ;; MSG SIZE rcvd: 117 C:\> --------- Issue 2: --------- -> Partial Bounce email content: (I've swapped @ for *) ID: <S347AD> Mail From: <stkilda*nzn.com.au> Rcpt To: <sweetheartsmusic*gmail.com> Server: <od-in-f83.google.com> [64.233.161.83] ErrCode = -217 ErrString = Error connecting to remote address -> Looking at the DIG for gmail.com, I get the same thing - "A" record was used for SMTP. --------- It seems that in your DNS rewrite; now, the "A" record is favoured if it exists. Rob :-) _________________________________________________ Note To Self: Remember to put something witty here later... -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rob Arends Sent: Monday, April 16, 2007 6:45 PM To: xmail@xmailserver.org Subject: [xmail] Re: 1.25-pre06 ... Oh, ok !! So you want me to try without smartdnshost ?? (This mail sent without smartdnshost!) Rob :-) _________________________________________________ Note To Self: Remember to put something witty here later... -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Davide Libenzi Sent: Monday, April 16, 2007 2:13 PM To: xmail@xmailserver.org Subject: [xmail] Re: 1.25-pre06 ... On Mon, 16 Apr 2007, Rob Arends wrote: > Also, using smartdnshost (local named process) So basically you're still using 1.24 :) - Davide - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]