Ralf wrote:
While testing xmail I encountered the following:
According to the following document Microsoft seems to use
the following syntax in their mail clients:
MAIL FROM:ad...@test.com
RCPT TO: u...@domain.com
Here is the above mentioned MS document:
http://support.microsoft.com/kb/153119
The above forms of these commands are not recognized by xmail.
xmail gives error "501 Syntax error in parameters or arguments: (-31)"
xmail accepts only the following form:
MAIL FROM:<ad...@test.com>
RCPT TO:<u...@domain.com>
I don't know what the standard says, but I wouldn't be surpized if it's
MS guilt.
BTW, does xmail not have a debugging log where all
commands exchanged with the other side get recorded,
ie. something like this:
20:30:22 [65.15.47.74][2392] rsp: 220 Sending Mail Server
20:30:22 [65.15.47.74][2392] connected at 3/8/2005 8:30:22 PM
20:30:22 [65.15.47.74][2392] cmd: EHLO ComputerName
20:30:22 [65.15.47.74][2392] rsp: 250-ns1 Hello [xx.xx.xx.xx] 250-SIZE
31457280 250-AUTH LOGIN CRAM-MD5 250 OK
20:30:22 [65.15.47.74][2392] cmd: AUTH LOGIN
20:30:22 [65.15.47.74][2392] rsp: 334 VXNlcm5hbWU6
20:30:22 [65.15.47.74][2392] rsp: 334 UGFzc3dvcmQ6
20:30:22 [65.15.47.74][2392] rsp: 235 Authentication successful
20:30:22 [65.15.47.74][2392] cmd: MAIL FROM: <u...@sendingdomain.com>
20:30:22 [65.15.47.74][2392] rsp: 250 OK <u...@sendingdomain.com> Sender ok
20:30:22 [65.15.47.74][2392] cmd: RCPT TO: <u...@aol.com>
20:30:22 [65.15.47.74][2392] rsp: 250 OK <u...@aol.com> Recipient ok
20:30:22 [65.15.47.74][2392] cmd: DATA
20:30:22 [65.15.47.74][2392] rsp: 354 Start mail input; end with
<CRLF>.<CRLF>
20:30:22 [65.15.47.74][2392] rsp: 250 OK
20:30:25 [65.15.47.74][2392] cmd: QUIT
20:30:25 [65.15.47.74][2392] rsp: 221 Service closing transmission channel
20:30:25 [65.15.47.74][2392] disconnected at 3/8/2005 8:30:25 PM
_______________________________________________
xmail mailing list
xmail@xmailserver.org
http://xmailserver.org/mailman/listinfo/xmail