I'm trying to get Xinerama working on my G400 Max card (The card itself is
dual-headed). I've included the Config file and logfile. The monitor
timings are good, as well as the resolutions are within spec on each of
the monitors. I have shut off frame buffering in the kernel as suggested
in #xfree86 at irc.openprojects.net
When I had frame buffering on, it would go from garbage on the second
screen to lines when I started up X.
Currently, the first monitor's X session is stretched as if it were on two
screens, and the mouse rolls over to the second monitor, but there is
simply nothing being shown on the second monitor. Is there anything else
you need? What would you suggest? The Rainbow Runner G-series is
attached to it, but it's not even being activated at this point (one
disaster at a time).
Thanks,
Joe Carnes
XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.5 i686 [ELF]
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Dec 6 15:55:07 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Multi Layout"
(**) |-->Screen "Screen1" (0)
(**) | |-->Monitor "The 17inch"
(**) | |-->Device "G4001"
(**) |-->Screen "Screen2" (1)
(**) | |-->Monitor "The 15inch"
(**) | |-->Device "G4002"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(WW) The directory "/usr/X11R6/lib/X11/fonts/local/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/ifonts/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Speedo/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) FontPath is completely invalid. Using compiled-in default.
(==) FontPath set to
"/usr/lib/X11/fonts/misc/,/usr/lib/X11/fonts/Speedo/,/usr/lib/X11/fonts/Type1/,/usr/lib/X11/fonts/CID/,/usr/lib/X11/fonts/75dpi/,/usr/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/lib/X11/rgb"
(**) Option "Xinerama"
(**) Xinerama: enabled
(--) using VT number 7
(II) Open APM successful
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7180 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7181 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 01 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 105a,4d30 card 105a,4d33 rev 02 class 01,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10b7,9055 card 10b7,9055 rev 30 class 02,00,00 hdr 00
(II) PCI: 00:0c:0: chip 1102,0002 card 1102,8027 rev 08 class 04,01,00 hdr 80
(II) PCI: 00:0c:1: chip 1102,7002 card 1102,0020 rev 08 class 09,80,00 hdr 80
(II) PCI: 01:00:0: chip 102b,0525 card 102b,217d rev 04 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0f (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xeee00000 - 0xefefffff (0x1100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xe2c00000 - 0xe6cfffff (0x4100000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) Matrox MGA G400 AGP rev 4, Mem @ 0xe4000000/25, 0xefefc000/14,
0xef000000/23, BIOS @ 0xefee0000/16
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xeffcff80 - 0xeffcffff (0x80) MX[B]
[1] -1 0xeffe0000 - 0xefffffff (0x20000) MX[B]
[2] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[3] -1 0xefee0000 - 0xefeeffff (0x10000) MX[B](B)
[4] -1 0xef000000 - 0xef7fffff (0x800000) MX[B](B)
[5] -1 0xefefc000 - 0xefefffff (0x4000) MX[B](B)
[6] -1 0xe4000000 - 0xe5ffffff (0x2000000) MX[B](B)
[7] -1 0x0000dfa0 - 0x0000dfa7 (0x8) IX[B]
[8] -1 0x0000de80 - 0x0000de9f (0x20) IX[B]
[9] -1 0x0000d800 - 0x0000d87f (0x80) IX[B]
[10] -1 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[11] -1 0x0000dfe0 - 0x0000dfe3 (0x4) IX[B]
[12] -1 0x0000df80 - 0x0000df87 (0x8) IX[B]
[13] -1 0x0000dff0 - 0x0000dff3 (0x4) IX[B]
[14] -1 0x0000df90 - 0x0000df97 (0x8) IX[B]
[15] -1 0x0000df00 - 0x0000df1f (0x20) IX[B]
[16] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xeffcff80 - 0xeffcffff (0x80) MX[B]
[1] -1 0xeffe0000 - 0xefffffff (0x20000) MX[B]
[2] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[3] -1 0xefee0000 - 0xefeeffff (0x10000) MX[B](B)
[4] -1 0xef000000 - 0xef7fffff (0x800000) MX[B](B)
[5] -1 0xefefc000 - 0xefefffff (0x4000) MX[B](B)
[6] -1 0xe4000000 - 0xe5ffffff (0x2000000) MX[B](B)
[7] -1 0x0000dfa0 - 0x0000dfa7 (0x8) IX[B]
[8] -1 0x0000de80 - 0x0000de9f (0x20) IX[B]
[9] -1 0x0000d800 - 0x0000d87f (0x80) IX[B]
[10] -1 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[11] -1 0x0000dfe0 - 0x0000dfe3 (0x4) IX[B]
[12] -1 0x0000df80 - 0x0000df87 (0x8) IX[B]
[13] -1 0x0000dff0 - 0x0000dff3 (0x4) IX[B]
[14] -1 0x0000df90 - 0x0000df97 (0x8) IX[B]
[15] -1 0x0000df00 - 0x0000df1f (0x20) IX[B]
[16] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xeffcff80 - 0xeffcffff (0x80) MX[B]
[6] -1 0xeffe0000 - 0xefffffff (0x20000) MX[B]
[7] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[8] -1 0xefee0000 - 0xefeeffff (0x10000) MX[B](B)
[9] -1 0xef000000 - 0xef7fffff (0x800000) MX[B](B)
[10] -1 0xefefc000 - 0xefefffff (0x4000) MX[B](B)
[11] -1 0xe4000000 - 0xe5ffffff (0x2000000) MX[B](B)
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x0000dfa0 - 0x0000dfa7 (0x8) IX[B]
[15] -1 0x0000de80 - 0x0000de9f (0x20) IX[B]
[16] -1 0x0000d800 - 0x0000d87f (0x80) IX[B]
[17] -1 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[18] -1 0x0000dfe0 - 0x0000dfe3 (0x4) IX[B]
[19] -1 0x0000df80 - 0x0000df87 (0x8) IX[B]
[20] -1 0x0000dff0 - 0x0000dff3 (0x4) IX[B]
[21] -1 0x0000df90 - 0x0000df97 (0x8) IX[B]
[22] -1 0x0000df00 - 0x0000df1f (0x20) IX[B]
[23] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) Primary Device is: PCI 01:00:0
(--) Chipset mgag400 found
(--) Chipset mgag400 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xeffcff80 - 0xeffcffff (0x80) MX[B]
[6] -1 0xeffe0000 - 0xefffffff (0x20000) MX[B]
[7] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[8] -1 0xefee0000 - 0xefeeffff (0x10000) MX[B](B)
[9] -1 0xef000000 - 0xef7fffff (0x800000) MX[B](B)
[10] -1 0xefefc000 - 0xefefffff (0x4000) MX[B](B)
[11] -1 0xe4000000 - 0xe5ffffff (0x2000000) MX[B](B)
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x0000dfa0 - 0x0000dfa7 (0x8) IX[B]
[15] -1 0x0000de80 - 0x0000de9f (0x20) IX[B]
[16] -1 0x0000d800 - 0x0000d87f (0x80) IX[B]
[17] -1 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[18] -1 0x0000dfe0 - 0x0000dfe3 (0x4) IX[B]
[19] -1 0x0000df80 - 0x0000df87 (0x8) IX[B]
[20] -1 0x0000dff0 - 0x0000dff3 (0x4) IX[B]
[21] -1 0x0000df90 - 0x0000df97 (0x8) IX[B]
[22] -1 0x0000df00 - 0x0000df1f (0x20) IX[B]
[23] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xeffcff80 - 0xeffcffff (0x80) MX[B]
[6] -1 0xeffe0000 - 0xefffffff (0x20000) MX[B]
[7] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[8] -1 0xefee0000 - 0xefeeffff (0x10000) MX[B](B)
[9] -1 0xef000000 - 0xef7fffff (0x800000) MX[B](B)
[10] -1 0xefefc000 - 0xefefffff (0x4000) MX[B](B)
[11] -1 0xe4000000 - 0xe5ffffff (0x2000000) MX[B](B)
[12] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0x0000dfa0 - 0x0000dfa7 (0x8) IX[B]
[18] -1 0x0000de80 - 0x0000de9f (0x20) IX[B]
[19] -1 0x0000d800 - 0x0000d87f (0x80) IX[B]
[20] -1 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[21] -1 0x0000dfe0 - 0x0000dfe3 (0x4) IX[B]
[22] -1 0x0000df80 - 0x0000df87 (0x8) IX[B]
[23] -1 0x0000dff0 - 0x0000dff3 (0x4) IX[B]
[24] -1 0x0000df90 - 0x0000df97 (0x8) IX[B]
[25] -1 0x0000df00 - 0x0000df1f (0x20) IX[B]
[26] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[27] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[28] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(--) MGA(0): Chipset: "mgag400"
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xE4000000
(--) MGA(0): MMIO registers at 0xEFEFC000
(--) MGA(0): Pseudo-DMA transfer window at 0xEF000000
(--) MGA(0): BIOS at 0xEFEE0000
(--) MGA(0): Video BIOS info block at offset 0x07CE0
(WW) MGA(0): Video BIOS info block not detected!
(II) MGA(0): MGABios.RamdacType = 0x0
(==) MGA(0): Write-combining range (0xe4000000,0x2000000)
(--) MGA(0): Crtc2 will use 8192K of VideoRam
(--) MGA(0): VideoRAM: 24576 kByte
(WW) MGA(0): Failed to set up write-combining range (0xe4000000,0x1800000)
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C device "DDC:ddc2" registered.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: 0x85ac860
(II) MGA(0): Manufacturer: SAM Model: 1155 Serial#: 1145450807
(II) MGA(0): Year: 2001 Week: 27
(II) MGA(0): EDID Version: 1.2
(II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) MGA(0): Sync: Separate
(II) MGA(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) MGA(0): Gamma: 2.26
(II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) MGA(0): First detailed timing is preferred mode
(II) MGA(0): redX: 0.639 redY: 0.323 greenX: 0.275 greenY: 0.597
(II) MGA(0): blueX: 0.143 blueY: 0.062 whiteX: 0.283 whiteY: 0.298
(II) MGA(0): Supported VESA Video Modes:
(II) MGA(0): 720x400@70Hz
(II) MGA(0): 720x400@88Hz
(II) MGA(0): 640x480@60Hz
(II) MGA(0): 640x480@67Hz
(II) MGA(0): 640x480@72Hz
(II) MGA(0): 640x480@75Hz
(II) MGA(0): 800x600@56Hz
(II) MGA(0): 800x600@60Hz
(II) MGA(0): 800x600@72Hz
(II) MGA(0): 800x600@75Hz
(II) MGA(0): 832x624@75Hz
(II) MGA(0): 1024x768@87Hz (interlaced)
(II) MGA(0): 1024x768@60Hz
(II) MGA(0): 1024x768@70Hz
(II) MGA(0): 1024x768@75Hz
(II) MGA(0): 1152x870@75Hz
(II) MGA(0): Manufacturer's mask: 0
(II) MGA(0): Supported Future Video Modes:
(II) MGA(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) MGA(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) MGA(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) MGA(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) MGA(0): Supported additional Video Mode:
(II) MGA(0): clock: 94.5 MHz Image Size: 306 x 230 mm
(II) MGA(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border:
0
(II) MGA(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) MGA(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max
110 MHz
(II) MGA(0): Monitor name: S/M 753DF
(II) MGA(0): Serial No: HCCR704488
(II) MGA(0): end of I2C Monitor info
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 360 MHz
(II) MGA(0): The 17inch: Using hsync range of 30.00-70.00 kHz
(II) MGA(0): The 17inch: Using vrefresh range of 50.00-160.00 Hz
(II) MGA(0): Clock range: 12.00 to 360.00 MHz
(II) MGA(0): Not using default mode "1280x960" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(--) MGA(0): Virtual size is 1280x1024 (pitch 1280)
(**) MGA(0): Mode "1280x1024": 116.0 MHz, 68.7 kHz, 64.5 Hz
(II) MGA(0): Modeline "1280x1024" 116.00 1280 1328 1440 1688 1024 1025 1028 1066
+hsync +vsync
(--) MGA(0): Display dimensions: (32, 24) cm
(--) MGA(0): DPI set to (101, 108)
(II) MGA(0): YDstOrg is set to 0
(**) MGA(1): Depth 16, (--) framebuffer bpp 16
(==) MGA(1): RGB weight 565
(--) MGA(1): Chipset: "mgag400"
(==) MGA(1): Using AGP 1x mode
(--) MGA(1): Linear framebuffer at 0xE4000000
(--) MGA(1): MMIO registers at 0xEFEFC000
(--) MGA(1): Pseudo-DMA transfer window at 0xEF000000
(--) MGA(1): BIOS at 0xEFEE0000
(--) MGA(1): Video BIOS info block at offset 0x07CE0
(WW) MGA(1): Video BIOS info block not detected!
(II) MGA(1): MGABios.RamdacType = 0x0
(==) MGA(1): Write-combining range (0xe4000000,0x2000000)
(--) MGA(1): VideoRAM: 8192 kByte
(==) MGA(1): Write-combining range (0xe5800000,0x800000)
(II) MGA(1): I2C bus "DDC" initialized.
(II) MGA(1): I2C device "DDC:ddc2" registered.
(II) MGA(1): I2C device "DDC:ddc2" removed.
(II) MGA(1): I2C device "DDC:ddc2" registered.
(II) MGA(1): I2C device "DDC:ddc2" removed.
(II) MGA(1): I2C Monitor info: 0x85aea60
(II) MGA(1): Manufacturer: SAM Model: 1155 Serial#: 1145450807
(II) MGA(1): Year: 2001 Week: 27
(II) MGA(1): EDID Version: 1.2
(II) MGA(1): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) MGA(1): Sync: Separate
(II) MGA(1): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) MGA(1): Gamma: 2.26
(II) MGA(1): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) MGA(1): First detailed timing is preferred mode
(II) MGA(1): redX: 0.639 redY: 0.323 greenX: 0.275 greenY: 0.597
(II) MGA(1): blueX: 0.143 blueY: 0.062 whiteX: 0.283 whiteY: 0.298
(II) MGA(1): Supported VESA Video Modes:
(II) MGA(1): 720x400@70Hz
(II) MGA(1): 720x400@88Hz
(II) MGA(1): 640x480@60Hz
(II) MGA(1): 640x480@67Hz
(II) MGA(1): 640x480@72Hz
(II) MGA(1): 640x480@75Hz
(II) MGA(1): 800x600@56Hz
(II) MGA(1): 800x600@60Hz
(II) MGA(1): 800x600@72Hz
(II) MGA(1): 800x600@75Hz
(II) MGA(1): 832x624@75Hz
(II) MGA(1): 1024x768@87Hz (interlaced)
(II) MGA(1): 1024x768@60Hz
(II) MGA(1): 1024x768@70Hz
(II) MGA(1): 1024x768@75Hz
(II) MGA(1): 1152x870@75Hz
(II) MGA(1): Manufacturer's mask: 0
(II) MGA(1): Supported Future Video Modes:
(II) MGA(1): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) MGA(1): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) MGA(1): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) MGA(1): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) MGA(1): Supported additional Video Mode:
(II) MGA(1): clock: 94.5 MHz Image Size: 306 x 230 mm
(II) MGA(1): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border:
0
(II) MGA(1): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) MGA(1): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max
110 MHz
(II) MGA(1): Monitor name: S/M 753DF
(II) MGA(1): Serial No: HCCR704488
(II) MGA(1): end of I2C Monitor info
(==) MGA(1): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(1): Min pixel clock is 12 MHz
(==) MGA(1): Max pixel clock is 135 MHz
(II) MGA(1): The 15inch: Using hsync range of 31.50-64.00 kHz
(II) MGA(1): The 15inch: Using vrefresh range of 50.00-120.00 Hz
(II) MGA(1): Clock range: 12.00 to 135.00 MHz
(II) MGA(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MGA(1): Not using default mode "1024x768" (hsync out of range)
(II) MGA(1): Not using default mode "1152x864" (hsync out of range)
(II) MGA(1): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) MGA(1): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(1): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) MGA(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MGA(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MGA(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MGA(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MGA(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MGA(1): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) MGA(1): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) MGA(1): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) MGA(1): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) MGA(1): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MGA(1): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MGA(1): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(1): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(--) MGA(1): Virtual size is 1024x768 (pitch 1024)
(**) MGA(1): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) MGA(1): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync
+vsync
(--) MGA(1): Display dimensions: (32, 24) cm
(--) MGA(1): DPI set to (81, 81)
(II) MGA(1): YDstOrg is set to 0
(II) resource ranges after preInit:
[0] 0 0xef000000 - 0xef7fffff (0x800000) MX[B]
[1] 0 0xefefc000 - 0xefefffff (0x4000) MX[B]
[2] 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
[3] 0 0xef000000 - 0xef7fffff (0x800000) MX[B]
[4] 0 0xefefc000 - 0xefefffff (0x4000) MX[B]
[5] 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
[6] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[7] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[8] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[9] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[10] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[11] -1 0xeffcff80 - 0xeffcffff (0x80) MX[B]
[12] -1 0xeffe0000 - 0xefffffff (0x20000) MX[B]
[13] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[14] -1 0xefee0000 - 0xefeeffff (0x10000) MX[B](B)
[15] -1 0xef000000 - 0xef7fffff (0x800000) MX[B](B)
[16] -1 0xefefc000 - 0xefefffff (0x4000) MX[B](B)
[17] -1 0xe4000000 - 0xe5ffffff (0x2000000) MX[B](B)
[18] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[19] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[20] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[21] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0x0000dfa0 - 0x0000dfa7 (0x8) IX[B]
[24] -1 0x0000de80 - 0x0000de9f (0x20) IX[B]
[25] -1 0x0000d800 - 0x0000d87f (0x80) IX[B]
[26] -1 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[27] -1 0x0000dfe0 - 0x0000dfe3 (0x4) IX[B]
[28] -1 0x0000df80 - 0x0000df87 (0x8) IX[B]
[29] -1 0x0000dff0 - 0x0000dff3 (0x4) IX[B]
[30] -1 0x0000df90 - 0x0000df97 (0x8) IX[B]
[31] -1 0x0000df00 - 0x0000df1f (0x20) IX[B]
[32] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[33] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[34] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(WW) MGA(0): Failed to set up write-combining range (0xe4000000,0x1800000)
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2200+664: 2864
(WW) MGA(0): Direct rendering is not supported when Xinerama is enabled
(EE) MGA(0): [drm] DRIScreenInit failed. Disabling DRI.
(II) MGA(0): Using 5529 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Driver provided FillMono8x8PatternRects replacement
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(**) Option "dpms"
(**) MGA(0): DPMS enabled
(II) MGA(0): Using overlay video
(==) MGA(0): Direct rendering disabled
(==) MGA(1): Write-combining range (0xe5800000,0x800000)
(--) MGA(1): 16 DWORD fifo
(EE) MGA(1): Not initializing the DRI on the second head
(II) MGA(1): Using 3328 lines for offscreen memory.
(II) MGA(1): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Driver provided FillMono8x8PatternRects replacement
Setting up tile and stipple cache:
32 128x128 slots
20 256x256 slots
6 512x512 slots
(==) MGA(1): Backing store disabled
(==) MGA(1): Silken mouse enabled
(==) MGA(1): Direct rendering disabled
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Mouse1: Buttons: 3
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
# Load "glx"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/ifonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "The 17inch"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30 - 70
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
# Maketh my monitor to refresh faster
Modeline "1280x1024" 116 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
+vsync
Option "DPMS"
EndSection
Section "Monitor"
Identifier "The 15inch"
HorizSync 31.5-64.0
VertRefresh 50-120
# Option "DPMS"
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
#Section "Device"
# Identifier "Standard VGA"
# VendorName "Unknown"
# BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
#EndSection
# Device configured by xf86config:
Section "Device"
Identifier "G4001"
Driver "mga"
BusID "1:0:0"
Screen 0
#VideoRam 16384
#VideoRam 16384
# Insert Clocks lines here if appropriate
EndSection
Section "Device"
Identifier "G4002"
Driver "mga"
BusID "1:0:0"
Screen 1
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen1"
Device "G4001"
Monitor "The 17inch"
DefaultDepth 16
# Subsection "Display"
# Depth 8
# Modes "640x480"
# ViewPort 0 0
# EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024"
# ViewPort 0 0
EndSubsection
# Subsection "Display"
# Depth 24
# Modes "1024x768"
# ViewPort 0 0
# EndSubsection
# Subsection "Display"
# Depth 32
# Modes "1280x1024" "800x60"
# ViewPort 0 0
# EndSubsection
EndSection
Section "Screen"
Identifier "Screen2"
Device "G4002"
Monitor "The 15inch"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768"
EndSubSection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Multi Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen 0 "Screen1"
Screen 1 "Screen2" RightOf "Screen1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "Xinerama"
EndSection
