> Does XFree work when the brooktree card is plugged in, but the v4l > module is NOT loaded in the XF86Config?
Yeah, this seems to work OK since Xv is ignoring the brooktree device.... > It does seem that ScreenInit() is getting called twice on your > system, you could try and track that down and find out why. I'm not real familiar with X debugging - any hints on how I would go about figuring this out? I traced through some test programs and it seems the X dies every time the XV_COLORKEY atom is queryed or modified. I need to use colorkeying to draw on top of live video... If you have any other ideas or suggestions I would really appreciate them Thanks! Mark ----- Original Message ----- From: "Sottek, Matthew J" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Thursday, January 10, 2002 10:45 AM Subject: RE: [Xpert]Intel I815 and Xv > > >As far as the bus stuff goes, the computer is a compactPCI. Not > >sure if you're familiar with this, but basicallly its a different > >pinout for the PCI bus for ruggedized computers. > > Ahh yes, I read too quickly. I thought you said "Compaq"... the bus > converter makes more sense now. > > >It doesn't seem that the brooktree and i815 ranges overlap > >(but they're close.....). > > Looking at your logs again... they don't overlap even in the XFree > output. It is difficult text to parse and I misread it. They are > close but this isn't a problem. > > I looked into the pci scanning code and looked at the logs from some > other i815's. They all have Bus -1 output for the ISA bridge. It > probably isn't causing any problems, and may just be the result of > having an ISA bridge but not using it for anything. > > > > -Matt > > > _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
