Tom, The 830M and 845G chipsets drivers do mode setting through the video bios in order to support the 3rd party Flat Panel and TV encoders that may be present in the systems. This probably prevents you from getting the mode you want. The i810 and i815 systems program their modes directly, so they have a much wider set of available modes.
It may be possible for your system provider to make a custom vbios that supports the 848x480 mode you are seeking, but as far as I know there is no configuration changes you could make to solve the problem. (I am not an expert on the 830/845 driver so there may be other options available that I am not aware of) -Matt -----Original Message----- From: Tom Fishwick [mailto:[EMAIL PROTECTED]] Sent: Monday, July 15, 2002 9:12 AM To: [EMAIL PROTECTED] Subject: [Xpert]i810 driver on the 845 trying to do 848x480 Hi there, I am in some rather desperate need of help. I am trying to get the i810 driver to drive an i845 board at 848x480 (for a plasma screen) and am getting the message that no matching modes are found in my config file, and then it shows a list of modes that bios supports. Is there some way that I can force the use of a modeline? ignore the bios? I don't really know X in depth... but the i810 driver worked with the i815 and i810 board with X 4.1 at 848x480 with a modeline I constructed. I'm hoping the capability is there, it's just some config stuff. Anyhow, this is critical to our business to work. Any help would be greatly appreciated. thanks, Tom _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
