I've played around with trying to get my dual head hardware working, ATI Radeon VE with vga and digital out. I've tried all kinds of configurations to no avail. The best I get is a mirrored image on both monitors.
I'm including the entries below I noted from a previous poster because my card is an AGP card, but the entry below is the first I've seen that contained a reference to a AGP busid. Might this be my problem? A couple of questions regarding this as well. lspci shows: 01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5159 for my card, which would seem to identify it as agp. Question is, should I be using 01:00:0 for both of my entries? And is that format correct? That is, lspci has a '.' whereas the examples below contain ':'. Thanks for any further assistance. > Section "Device" Identifier "ATI Technologies, Inc. Rage 128 GL > [RF]" Driver "ati" BusID "AGP:01:05:00" Screen 0 > <=========================== EndSection > > Section "Device" Identifier "Silicon Integrated Systems (SiS) > 6326" Driver "sis" BusID "PCI:00:08:00" Screen 1 > <=========================== EndSection > > The keywords "Screen" are not appropriate in your Device sections. > They are used to identify a particular head on a dual-head card. Try > just deleting these two lines. > -- Until later: Geoffrey [EMAIL PROTECTED] I didn't have to buy my radio from a specific company to listen to FM, why doesn't that apply to the Internet (anymore...)? _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
