Hi Sebastien,
I saw your post on
http://www.xfree86.org/pipermail/xpert/2002-September/020876.html
I too have an i810 box every thing works fine on i810 with TVout in
Pal mode but does not work on NTSE the video is blue. ( ie i the
complete video is blue). Your problem is due to the analog. try setting
to a different mode line.
My modeline that works with pal
Modeline "640x480" 36.00 640 696 752 840 480 481 484 509 -hsync -vsync
you can use xvidtune to set your 800x600 modeline.
Please can u supply your NTSC mode line.
I have not subscribed to this mailing list. so please mail me to
this address only.
bye
Thanks
Tushar.
----------- Your Post -------------
Hello,
I use Xine to see my favorite film.
I have little Box, i810 chipset and chrontel 7007a encoder Tv.
I have always Tv ouput enabled (bios configuration).
In fact, i have a problem between NTSC and PAL option.
I explain :
When i use the Xv option in Xine, and PAL setted in bios, i have a blue
screen. I use 800x600 resolution.
If i set 640x480, I have half-screen film on my Tv (but i have the all
desktop on the Tv).
I tested the NTSC output (yet bios configuration) and have all the film
like the desktop on my Tv.
I have 4.2.1 XFree, and 2.4.8-10 kernel drivers.
How i can move the XV output on my tv screen ?
Thanks for all.
--------------------------------------------------------------------------
a two line "cant help" response is less frustrating than no response...!
--- Anonymous.
---------------------------------------------------------------------------
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
