The launchd socket does not use xauth. Again, use -vvv to get mode info. On Sep 28, 2011, at 06:08, Daniel Seagraves wrote:
> Unless it somehow got disabled on every host on our network, that's not it. > As a test, I opened Terminal next to xterm, and set DISPLAY in xterm equal to > what was in Terminal (/tmp/launch-LNnWLq/org.x:0 in this case) > After doing that, ssh -XY works again. > Maybe ssh is doing something unusual that causes :0 to fail? > > On Sep 27, 2011, at 1:34 PM, Jeremy Huddleston wrote: > >> >> On Sep 27, 2011, at 6:12 AM, Daniel Seagraves wrote: >> >>> For some reason, I can't ssh -XY anymore. $DISPLAY on the Mac is :0 >>> The sshd on the remote side logs the message "channel 3: open failed: >>> administratively prohibited: open failed" >> >> You can use '-vvv' to get much more verbose information out of ssh, but my >> guess is that your remote system doesn't allow ssh forwarding. You should >> check /etc/ssh/sshd_config or /etc/sshd_config on the remote host. >> >> >> >> >> _______________________________________________ >> Xquartz-dev mailing list >> [email protected] >> http://lists.macosforge.org/mailman/listinfo.cgi/xquartz-dev > > > _______________________________________________ > Xquartz-dev mailing list > [email protected] > http://lists.macosforge.org/mailman/listinfo.cgi/xquartz-dev > _______________________________________________ Xquartz-dev mailing list [email protected] http://lists.macosforge.org/mailman/listinfo.cgi/xquartz-dev
