Those bits fixed my problem with my i810-based Fujitsu P5020. Xorg now comes up and works. Both the ural and the ipw2100 driver don't, however, so I'll move along to the next mailing list.
Thanks for the bits. ian On 26 Feb 2009, at 17:11, Niveditha Rau wrote: > Could you please try the attached intel drivers on your system to > see if your problem with starting X on 855 with build 107 is resolved? > > %cp intel_drv.so.32 /usr/X11/lib/modules/drivers/ > %cp intel_drv.so.64 /usr/X11/lib/modules/drivers/amd64/ > > Thanks > Niveditha > > Ewald Ertl wrote: > >> Hi, >> >> for anyone else interested: Switching to the VESA driver in the >> xorg.conf >> lets come up a display and Build 107 runs. >> >> Regards >> Ewald >> >> On Fri, Feb 20, 2009 at 8:45 AM, Ewald Ertl <ewald.ertl at gmail.com >> <mailto:ewald.ertl at gmail.com >> >> wrote: >> >> Hi Niveditha, >> >> I have attached the following files: >> o) xorg.conf_backup : this is my xorg config on Build 106. Here I >> have removed >> the RgbPath as stated in Alan Coopersmith's Weblog >> <http://blogs.sun.com/alanc/entry/xorg_1_5_3_in>. >> >> o) Xorg.0.log_with_106cfg : The log file with the >> xorg.conf_backup, but with removed >> RgbPath entry. >> >> o) Xorg.0.log_without_config : Removed the xorg.conf and started >> with the builtin >> values. >> >> o) scanpci.txt : The result of scanpci on the Build 107. >> >> Here I'm using an attached external monitor on Build 106 in dual >> screen mode. >> But for the test, I have disconnected the external monitor. >> >> Thanks for your help >> >> Ewald >> On Thu, Feb 19, 2009 at 6:12 PM, Niveditha Rau >> <Niveditha.Rau at sun.com <mailto:Niveditha.Rau at sun.com>> wrote: >> >> Could you please include the entire /var/log/Xorg.0.log and >> the output of scanpci. >> >> Thanks >> Niveditha >> >> Ewald Ertl wrote: >> >> Hello, >> >> Today I upgraded my Fujitsu Siemens Laptop to Build 107. >> bash-3.2$ prtdiag >> System Configuration: FUJITSU SIEMENS LIFEBOOK S6120 >> BIOS Configuration: Phoenix/FUJITSU Version 1.25 >> 01/29/2004 >> >> >> After the reboot, *X fails to start. * >> >> The Xorg.0.log showed >> >> Couldn't find PLL settings for mode! >> >> This is in combination with an intel graphic-Chipset. >> There are some entries for the Xorg on the Linux side. >> >> Ewald >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> xwin-discuss mailing list >> xwin-discuss at opensolaris.org >> <mailto:xwin-discuss at opensolaris.org> >> >> >> >> > > <intel_drv.so.32><intel_drv.so.64>
