Thanx for your replies. Now Ive tried a bit more and have some problems. I will
submit this to the HCL soon.
bash-3.2# xrandr --verbose
Screen 0: minimum 640 x 400, current 1400 x 1050, maximum 1400 x 1050
default connected 1400x1050+0+0 (0x46) normal (normal) 0mm x 0mm
Identifier: 0x45
Timestamp: 2529229
Subpixel: horizontal rgb
Clones:
CRTC: 0
CRTCs: 0
1400x1050 (0x46) 110.2MHz *current
h: width 1400 start 0 end 0 total 1400 skew 0 clock 78.8KHz
v: height 1050 start 0 end 0 total 1050 clock 75.0Hz
1280x1024 (0x47) 99.6MHz
h: width 1280 start 0 end 0 total 1280 skew 0 clock 77.8KHz
v: height 1024 start 0 end 0 total 1024 clock 76.0Hz
1152x864 (0x48) 75.6MHz
h: width 1152 start 0 end 0 total 1152 skew 0 clock 65.7KHz
v: height 864 start 0 end 0 total 864 clock 76.0Hz
1024x768 (0x49) 59.8MHz
h: width 1024 start 0 end 0 total 1024 skew 0 clock 58.4KHz
v: height 768 start 0 end 0 total 768 clock 76.0Hz
800x600 (0x4a) 35.0MHz
h: width 800 start 0 end 0 total 800 skew 0 clock 43.8KHz
v: height 600 start 0 end 0 total 600 clock 73.0Hz
640x480 (0x4b) 22.4MHz
h: width 640 start 0 end 0 total 640 skew 0 clock 35.0KHz
v: height 480 start 0 end 0 total 480 clock 73.0Hz
720x400 (0x4c) 20.4MHz
h: width 720 start 0 end 0 total 720 skew 0 clock 28.4KHz
v: height 400 start 0 end 0 total 400 clock 71.0Hz
etc/X11/xorg.conf:
Section "Monitor"
Option "PreferredMode" "1680x1050"
Identifier "Monitor0"
VendorName "NEC"
ModelName "MultiSync "
Option "dpms"
DisplaySize 433 271
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Modeline "1680x1050_75.00" 188.07 1680 1800 1984 2288 1050 1051 1054
1096
-HSync +Vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "ATI Technologies Inc"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
How do I know which version of ATI driver I am using? Am I using it at all?
Below it speaks of VESA driver? (How do I enable the graphic effects in
Compiz?)
/var/log/Xorg.0.log:
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: SunOS 5.11 snv_84 i86pc
Current Operating System: SunOS frasse 5.11 snv_93 i86pc
Build Date: 20 June 2008
Solaris ABI: 64-bit
SUNWxorg-server package version: 6.9.0.5.11.9300,REV=0.2008.06.20
SUNWxorg-graphics-ddx package version: 6.9.0.5.11.9300,REV=0.2008.06.20
SUNWxorg-mesa package version: 6.9.0.5.11.9300,REV=0.2008.06.20
Before reporting problems, check http://sunsolve.sun.com/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 15 14:02:14 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/X11/lib/X11/fonts/Type1/sun/" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/X11/lib/X11/fonts/TrueType/,
/usr/X11/lib/X11/fonts/Type1/,
/usr/X11/lib/X11/fonts/F3bitmaps/,
/usr/X11/lib/X11/fonts/misc/,
/usr/X11/lib/X11/fonts/100dpi/,
/usr/X11/lib/X11/fonts/75dpi/
(**) RgbPath set to "/usr/X11/lib/X11/rgb"
(**) ModulePath set to "/usr/X11/lib/modules/amd64"
(II) Loader magic: 60e0c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on solaris
(II) LoadModule: "pcidata"
(II) Loading /usr/X11/lib/modules/amd64//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2e20 card 1458,5000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2e21 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1a:0: chip 8086,3a37 card 1458,5004 rev 00 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,3a38 card 1458,5004 rev 00 class 0c,03,00 hdr 00
(II) PCI: 00:1a:2: chip 8086,3a39 card 1458,5004 rev 00 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,3a3c card 1458,5006 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,3a3e card 1458,a102 rev 00 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,3a40 card 0000,0000 rev 00 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,3a42 card 0000,0000 rev 00 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,3a34 card 1458,5004 rev 00 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,3a35 card 1458,5004 rev 00 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,3a36 card 1458,5004 rev 00 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,3a3a card 1458,5006 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 90 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,3a16 card 1458,5001 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,3a20 card 1458,b002 rev 00 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,3a30 card 1458,5001 rev 00 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,3a26 card 1458,b002 rev 00 class 01,01,85 hdr 00
(II) PCI: 01:00:0: chip 1002,9442 card 1002,0502 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,aa30 card 1002,aa30 rev 00 class 04,03,00 hdr 80
(II) PCI: 03:00:0: chip 8086,10b9 card 8086,1083 rev 06 class 02,00,00 hdr 00
(II) PCI: 04:00:0: chip 11ab,6081 card 11ab,11ab rev 09 class 01,00,00 hdr 00
(II) PCI: 04:06:0: chip 104c,8024 card 1458,1000 rev 00 class 0c,00,10 hdr 00
(II) PCI: 04:07:0: chip 1283,8213 card 1458,b000 rev 00 class 01,01,85 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
....
(II) LoadModule: "freetype"
(II) Loading /usr/X11/lib/modules/fonts/amd64//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "vesa"
(II) Loading /usr/X11/lib/modules/drivers/amd64//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/X11/lib/modules/input/amd64//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/X11/lib/modules/input/amd64//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01:00:0
(--) Chipset vesa found
.....
(II) LoadModule: "vbe"
(II) Loading /usr/X11/lib/modules/amd64//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11/lib/modules/amd64//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 16384 kB
(II) VESA(0): VESA VBE OEM: ATI ATOMBIOS
(II) VESA(0): VESA VBE OEM Software Rev: 11.4
(II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) VESA(0): VESA VBE OEM Product: RV770
(II) VESA(0): VESA VBE OEM Product Rev: 01.00
(++) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level 2
(II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
(II) VESA(0): VESA VBE DDC read successfully
(II) VESA(0): Manufacturer: NEC Model: 6699 Serial#: 16843009
(II) VESA(0): Year: 2006 Week: 6
(II) VESA(0): EDID Version: 1.3
(II) VESA(0): Digital Display Input
(II) VESA(0): Max H-Image Size [cm]: horiz.: 43 vert.: 27
(II) VESA(0): Gamma: 2.20
(II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) VESA(0): First detailed timing is preferred mode
(II) VESA(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.610
(II) VESA(0): blueX: 0.145 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
(II) VESA(0): Supported VESA Video Modes:
(II) VESA(0): 720x400 at 70Hz
(II) VESA(0): 640x480 at 60Hz
(II) VESA(0): 640x480 at 67Hz
(II) VESA(0): 640x480 at 72Hz
(II) VESA(0): 640x480 at 75Hz
(II) VESA(0): 800x600 at 56Hz
(II) VESA(0): 800x600 at 60Hz
(II) VESA(0): 800x600 at 72Hz
(II) VESA(0): 800x600 at 75Hz
(II) VESA(0): 832x624 at 75Hz
(II) VESA(0): 1024x768 at 60Hz
(II) VESA(0): 1024x768 at 70Hz
(II) VESA(0): 1024x768 at 75Hz
(II) VESA(0): 1280x1024 at 75Hz
(II) VESA(0): 1152x870 at 75Hz
(II) VESA(0): Manufacturer's mask: 0
(II) VESA(0): Supported Future Video Modes:
(II) VESA(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) VESA(0): #1: hsize: 1280 vsize 720 refresh: 75 vid: 53121
(II) VESA(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) VESA(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) VESA(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
(II) VESA(0): #5: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
(II) VESA(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) VESA(0): Supported additional Video Mode:
(II) VESA(0): clock: 146.2 MHz Image Size: 433 x 270 mm
(II) VESA(0): h_active: 1680 h_sync: 1960 h_sync_end 2136 h_blank_end 2240
h_bo
rder: 0
(II) VESA(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089
v_bo
rder: 0
(II) VESA(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 83 kHz,
PixClock
max 170 MHz
(II) VESA(0): Monitor name: 20WGX2
(II) VESA(0): Serial No: 62102215GB
(II) VESA(0): EDID (in hex):
(II) VESA(0): 00ffffffffffff0038a3996601010101
(II) VESA(0): 06100103802b1b78eac505a3574a9c25
(II) VESA(0): 125054bfef80714f81cf814f81809500
(II) VESA(0): 9040b300010121399030621a274018b0
(II) VESA(0): 3640b10e1100001c000000fd00384b1f
(II) VESA(0): 5311000a202020202020000000fc0032
(II) VESA(0): 30574758320a202020202020000000ff
(II) VESA(0): 00363231303232313547420a2020008f
(II) VESA(0): Using hsync ranges from config file
(II) VESA(0): Using vrefresh ra(II) VESA(0): Modeline "640x480" 30.24 640
704 768 864 480 483 486 525 -hsync
-vsync
(II) VESA(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525
-hsync
-vsync
(II) VESA(0): Modeline "720x400" 28.32 720 738 846 900 400 412 414 449
-hsync
+vsync
(II) VESA(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028
1
066 +hsync +vsync
(II) VESA(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800
+
hsync +vsync
(II) VESA(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806
-
hsync -vsync
(II) VESA(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806
-
hsync -vsync
(II) VESA(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667
-hsyn
c -vsync
(II) VESA(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
+hsyn
c +vsync
(II) VESA(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
+hsyn
c +vsync
(II) VESA(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
+
hsync +vsync
(II) VESA(0): Modeline "1152x864" 104.00 1152 1224 1344 1536 864 867 871 905
-
hsync +vsync
(II) VESA(0): Modeline "1280x720" 95.75 1280 1360 1488 1696 720 723 728 755
-
hsync +vsync
(II) VESA(0): Modeline "1280x960" 130.00 1280 1368 1504 1728 960 963 967
1005
-hsync +vsync
(II) VESA(0): Modeline "1280x1024" 109.00 1280 1368 1496 1712 1024 1027 1034
1
063 -hsync +vsync
(II) VESA(0): Modeline "1440x900" 106.50 1440 1528 1672 1904 900 903 909 934
-
hsync +vsync
(II) VESA(0): Modeline "1400x1050" 121.75 1400 1488 1632 1864 1050 1053 1057
1
089 -hsync +vsync
(II) VESA(0): Modeline "1680x1050" 146.25 1680 1784 1960 2240 1050 1053 1059
1
089 -hsync +vsync
(II) VESA(0): Modeline "1680x1050" 146.25 1680 1960 2136 2240 1050 1053 1059
1
089 +hsync -vsync
(II) VESA(0): Searching for matching VESA mode(s):
nges from config file
........
(II) VESA(0): Total Memory: 256 64KB banks (16384kB)
(II) VESA(0): Monitor0: Using hsync range of 30.00-81.00 kHz
(II) VESA(0): Monitor0: Using vrefresh range of 56.00-75.00 Hz
(II) VESA(0): Not using mode "1680x1050" (no mode of this name)
(--) VESA(0): Virtual size is 1400x1050 (pitch 1400)
(**) VESA(0): Built-in mode "1400x1050"
(**) VESA(0): Built-in mode "1280x1024"
(**) VESA(0): Built-in mode "1280x1024"
(**) VESA(0): Built-in mode "1152x864"
(**) VESA(0): Built-in mode "1024x768"
(**) VESA(0): Built-in mode "800x600"
(**) VESA(0): Built-in mode "640x480"
(**) VESA(0): Built-in mode "720x400"
(**) VESA(0): Display dimensions: (430, 270) mm
(**) VESA(0): DPI set to (82, 98)
(II) VESA(0): Attempting to use 75Hz refresh for mode "1400x1050" (146)
(II) VESA(0): Attempting to use 75Hz refresh for mode "1280x1024" (166)
(II) VESA(0): Attempting to use 75Hz refresh for mode "1280x1024" (124)
(II) VESA(0): Attempting to use 75Hz refresh for mode "1152x864" (156)
(II) VESA(0): Attempting to use 75Hz refresh for mode "1024x768" (123)
(II) VESA(0): Attempting to use 72Hz refresh for mode "800x600" (122)
(II) VESA(0): Attempting to use 73Hz refresh for mode "640x480" (121)
(II) VESA(0): Attempting to use 70Hz refresh for mode "720x400" (136)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/X11/lib/modules/amd64//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.3
...
(**) Option "dpms"
(**) VESA(0): DPMS enabled
(WW) VESA(0): Option "PreferredMode" is not used
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing built-in extension LGE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11/lib/modules/extensions/amd64//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "Protocol" "auto"
(II) Mouse0: Setting Device option to "/dev/mouse"
(**) Mouse0: Protocol: VUID
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(II) Mouse0: Setting Buttons option to "4"
This message posted from opensolaris.org
