I will have to double check, but the issue did not appear under zeus... so qemu changed sometime after zeus ?
-----Original Message----- From: Alexander Kanavin <alex.kana...@gmail.com> Sent: Wednesday, August 31, 2022 8:12 AM To: Monsees, Steven C (US) <steven.mons...@baesystems.com> Cc: yocto@lists.yoctoproject.org Subject: Re: [yocto] #yocto #dunfell #qemux86-64 External Email Alert This email has been sent from an account outside of the BAE Systems network. Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros. For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar. The issue is on your side, not on yocto's. By default qemu is configured to show graphical output in a X11 window, so you need to run it in a X11 session, with correctly set DISPLAY environment variable. Alex On Wed, 31 Aug 2022 at 14:10, Monsees, Steven C (US) <steven.mons...@baesystems.com> wrote: > > > One final question, does this issue exist in kirkstone-4.0.2 ? > > Thanks, > Steve > > -----Original Message----- > From: Alexander Kanavin <alex.kana...@gmail.com> > Sent: Wednesday, August 31, 2022 7:42 AM > To: Monsees, Steven C (US) <steven.mons...@baesystems.com> > Cc: yocto@lists.yoctoproject.org > Subject: Re: [yocto] #yocto #dunfell #qemux86-64 > > External Email Alert > > This email has been sent from an account outside of the BAE Systems network. > > Please treat the email with caution, especially if you are requested to click > on a link, decrypt/open an attachment, or enable macros. For further > information on how to spot phishing, access “Cybersecurity OneSpace Page” and > report phishing by clicking the button “Report Phishing” on the Outlook > toolbar. > > > I need to see the errors to give a useful answer. If you want wayland, use > core-image-weston as the image. > > Alex > > On Wed, 31 Aug 2022 at 13:37, Monsees, Steven C (US) via > lists.yoctoproject.org <steven.monsees=baesystems....@lists.yoctoproject.org> > wrote: > > > > > > Thank you for the quick replay... > > > > The no graphic option does work but the kernel comes up with errors... > > > > Will full wayland support be added to the dunfell release ? > > > > Steve > > > > -----Original Message----- > > From: yocto@lists.yoctoproject.org <yocto@lists.yoctoproject.org> On > > Behalf Of Alexander Kanavin > > Sent: Wednesday, August 31, 2022 7:23 AM > > To: Monsees, Steven C (US) <steven.mons...@baesystems.com> > > Cc: yocto@lists.yoctoproject.org > > Subject: Re: [yocto] #yocto #dunfell #qemux86-64 > > > > External Email Alert > > > > This email has been sent from an account outside of the BAE Systems network. > > > > Please treat the email with caution, especially if you are requested to > > click on a link, decrypt/open an attachment, or enable macros. For further > > information on how to spot phishing, access “Cybersecurity OneSpace Page” > > and report phishing by clicking the button “Report Phishing” on the Outlook > > toolbar. > > > > > > You need to run this in a X11 session, or use 'nographic' parameter. > > > > Alex > > > > On Wed, 31 Aug 2022 at 13:17, Monsees, Steven C (US) via > > lists.yoctoproject.org > > <steven.monsees=baesystems....@lists.yoctoproject.org> wrote: > > > > > > > > > > > > Hello: > > > > > > > > > > > > I am attempting to evaluate dunfell -23.0.17, on a cetos7 linux box. > > > > > > > > > > > > When building the default : core-image-minimal or core-image-sato, > > > clean with no errors/warnings, on execution > > > > > > I get the following error for both (see below)… > > > > > > > > > > > > (1) Is this an issue with the release ?, and is there another release > > > I should be using ? > > > > > > (2) Is there something I need to pre-configure for these builds to run > > > properly ? > > > > > > (3) How might I resolve this issue ? > > > > > > > > > > > > 06:57 smonsees@yix490016 > > > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/d > > > un > > > fe > > > ll_Min>runqemu qemux86-64 > > > > > > runqemu - INFO - Running MACHINE=qemux86-64 bitbake -e ... > > > > > > runqemu - INFO - Continuing with the following parameters: > > > > > > KERNEL: > > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/ > > > du > > > nf > > > ell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3 > > > fe cb 08507_85f0668fea-r0-qemux86-64-20220830151817.bin] > > > > > > MACHINE: [qemux86-64] > > > > > > FSTYPE: [ext4] > > > > > > ROOTFS: > > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/ > > > du > > > nf > > > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64 > > > -2 > > > 02 > > > 20830151817.rootfs.ext4] > > > > > > CONFFILE: > > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/ > > > du > > > nf > > > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64 > > > -2 > > > 02 > > > 20830151817.qemuboot.conf] > > > > > > > > > > > > runqemu - INFO - Setting up tap interface under sudo > > > > > > [sudo] password for smonsees: > > > > > > runqemu - INFO - Network configuration: > > > ip=192.168.7.2::192.168.7.1:255.255.255.0 > > > > > > runqemu - INFO - Running > > > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64 > > > -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev > > > tap,id=net0,ifname=tap0,script=no,downscript=no -drive > > > file=/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4,if=virtio,format=raw > > > -show-cursor -usb -device usb-tablet -object > > > rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 > > > -cpu core2duo -m 256 -serial mon:vc -serial null -kernel > > > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin > > > -append 'root=/dev/vda rw mem=256M > > > ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 ' > > > > > > > > > > > > runqemu - ERROR - Failed to run qemu: Could not initialize SDL(x11 > > > not > > > available) - exiting > > > > > > > > > > > > runqemu - INFO - Cleaning up > > > > > > Set 'tap0' nonpersistent > > > > > > > > > > > > Thank you for your help, > > > > > > Steve > > > > > > > > > > > > > > > > > > > > > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#57961): https://lists.yoctoproject.org/g/yocto/message/57961 Mute This Topic: https://lists.yoctoproject.org/mt/93368526/21656 Mute #yocto:https://lists.yoctoproject.org/g/yocto/mutehashtag/yocto Mute #dunfell:https://lists.yoctoproject.org/g/yocto/mutehashtag/dunfell Mute #qemux86-64:https://lists.yoctoproject.org/g/yocto/mutehashtag/qemux86-64 Group Owner: yocto+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
