"Monsees, Steven C (US) via lists.yoctoproject.org" <steven.monsees=baesystems....@lists.yoctoproject.org> writes:
> I will have to double check, but the issue did not appear under zeus... > so qemu changed sometime after zeus ? Not qemu but runqemu script has been changed not so long time ago (this year) to pass `-display sdl` parameter unless nographic option has been specified. As it was mentioned you have to pass -nographic to use runqemu without SDL frontend > > -----Original Message----- > From: Alexander Kanavin <alex.kana...@gmail.com> > Sent: Wednesday, August 31, 2022 8:12 AM > To: Monsees, Steven C (US) <steven.mons...@baesystems.com> > Cc: yocto@lists.yoctoproject.org > Subject: Re: [yocto] #yocto #dunfell #qemux86-64 > > External Email Alert > > This email has been sent from an account outside of the BAE Systems network. > > Please treat the email with caution, especially if you are requested > to click on a link, decrypt/open an attachment, or enable macros. For > further information on how to spot phishing, access “Cybersecurity > OneSpace Page” and report phishing by clicking the button “Report > Phishing” on the Outlook toolbar. > > > The issue is on your side, not on yocto's. By default qemu is > configured to show graphical output in a X11 window, so you need to > run it in a X11 session, with correctly set DISPLAY environment > variable. > > Alex > > On Wed, 31 Aug 2022 at 14:10, Monsees, Steven C (US) > <steven.mons...@baesystems.com> wrote: >> >> >> One final question, does this issue exist in kirkstone-4.0.2 ? >> >> Thanks, >> Steve >> >> -----Original Message----- >> From: Alexander Kanavin <alex.kana...@gmail.com> >> Sent: Wednesday, August 31, 2022 7:42 AM >> To: Monsees, Steven C (US) <steven.mons...@baesystems.com> >> Cc: yocto@lists.yoctoproject.org >> Subject: Re: [yocto] #yocto #dunfell #qemux86-64 >> >> External Email Alert >> >> This email has been sent from an account outside of the BAE Systems network. >> >> Please treat the email with caution, especially if you are requested >> to click on a link, decrypt/open an attachment, or enable macros. >> For further information on how to spot phishing, access >> “Cybersecurity OneSpace Page” and report phishing by clicking the >> button “Report Phishing” on the Outlook toolbar. >> >> >> I need to see the errors to give a useful answer. If you want wayland, use >> core-image-weston as the image. >> >> Alex >> >> On Wed, 31 Aug 2022 at 13:37, Monsees, Steven C (US) via >> lists.yoctoproject.org >> <steven.monsees=baesystems....@lists.yoctoproject.org> wrote: >> > >> > >> > Thank you for the quick replay... >> > >> > The no graphic option does work but the kernel comes up with errors... >> > >> > Will full wayland support be added to the dunfell release ? >> > >> > Steve >> > >> > -----Original Message----- >> > From: yocto@lists.yoctoproject.org <yocto@lists.yoctoproject.org> On >> > Behalf Of Alexander Kanavin >> > Sent: Wednesday, August 31, 2022 7:23 AM >> > To: Monsees, Steven C (US) <steven.mons...@baesystems.com> >> > Cc: yocto@lists.yoctoproject.org >> > Subject: Re: [yocto] #yocto #dunfell #qemux86-64 >> > >> > External Email Alert >> > >> > This email has been sent from an account outside of the BAE Systems >> > network. >> > >> > Please treat the email with caution, especially if you are >> > requested to click on a link, decrypt/open an attachment, or >> > enable macros. For further information on how to spot phishing, >> > access “Cybersecurity OneSpace Page” and report phishing by >> > clicking the button “Report Phishing” on the Outlook toolbar. >> > >> > >> > You need to run this in a X11 session, or use 'nographic' parameter. >> > >> > Alex >> > >> > On Wed, 31 Aug 2022 at 13:17, Monsees, Steven C (US) via >> > lists.yoctoproject.org >> > <steven.monsees=baesystems....@lists.yoctoproject.org> wrote: >> > > >> > > >> > > >> > > Hello: >> > > >> > > >> > > >> > > I am attempting to evaluate dunfell -23.0.17, on a cetos7 linux box. >> > > >> > > >> > > >> > > When building the default : core-image-minimal or core-image-sato, >> > > clean with no errors/warnings, on execution >> > > >> > > I get the following error for both (see below)… >> > > >> > > >> > > >> > > (1) Is this an issue with the release ?, and is there another >> > > release I should be using ? >> > > >> > > (2) Is there something I need to pre-configure for these builds to >> > > run properly ? >> > > >> > > (3) How might I resolve this issue ? >> > > >> > > >> > > >> > > 06:57 smonsees@yix490016 >> > > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/d >> > > un >> > > fe >> > > ll_Min>runqemu qemux86-64 >> > > >> > > runqemu - INFO - Running MACHINE=qemux86-64 bitbake -e ... >> > > >> > > runqemu - INFO - Continuing with the following parameters: >> > > >> > > KERNEL: >> > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/ >> > > du >> > > nf >> > > ell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3 >> > > fe cb 08507_85f0668fea-r0-qemux86-64-20220830151817.bin] >> > > >> > > MACHINE: [qemux86-64] >> > > >> > > FSTYPE: [ext4] >> > > >> > > ROOTFS: >> > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/ >> > > du >> > > nf >> > > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64 >> > > -2 >> > > 02 >> > > 20830151817.rootfs.ext4] >> > > >> > > CONFFILE: >> > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/ >> > > du >> > > nf >> > > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64 >> > > -2 >> > > 02 >> > > 20830151817.qemuboot.conf] >> > > >> > > >> > > >> > > runqemu - INFO - Setting up tap interface under sudo >> > > >> > > [sudo] password for smonsees: >> > > >> > > runqemu - INFO - Network configuration: >> > > ip=192.168.7.2::192.168.7.1:255.255.255.0 >> > > >> > > runqemu - INFO - Running >> > > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64 >> > > -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev >> > > tap,id=net0,ifname=tap0,script=no,downscript=no -drive >> > > file=/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4,if=virtio,format=raw >> > > -show-cursor -usb -device usb-tablet -object >> > > rng-random,filename=/dev/urandom,id=rng0 -device >> > > virtio-rng-pci,rng=rng0 -cpu core2duo -m 256 -serial mon:vc >> > > -serial null -kernel >> > > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin >> > > -append 'root=/dev/vda rw mem=256M >> > > ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 ' >> > > >> > > >> > > >> > > runqemu - ERROR - Failed to run qemu: Could not initialize SDL(x11 >> > > not >> > > available) - exiting >> > > >> > > >> > > >> > > runqemu - INFO - Cleaning up >> > > >> > > Set 'tap0' nonpersistent >> > > >> > > >> > > >> > > Thank you for your help, >> > > >> > > Steve >> > > >> > > >> > > >> > > >> > > >> > > >> > >> > >> > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#57962): https://lists.yoctoproject.org/g/yocto/message/57962 Mute This Topic: https://lists.yoctoproject.org/mt/93368526/21656 Mute #yocto:https://lists.yoctoproject.org/g/yocto/mutehashtag/yocto Mute #dunfell:https://lists.yoctoproject.org/g/yocto/mutehashtag/dunfell Mute #qemux86-64:https://lists.yoctoproject.org/g/yocto/mutehashtag/qemux86-64 Group Owner: yocto+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
