On 01/27/2012 08:22 AM, Paul Gortmaker wrote: > Valdiated on v2011.12 with hardware: > > U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX > > Reset Status: Software Hard, External/Internal Soft, External/Internal > Hard > > CPU: e300c3, MPC8315E, Rev: 1.2 at 400 MHz, CSB: 133.333 MHz > Board: Freescale MPC8315ERDB Rev 1.0 > I2C: ready > DRAM: 128 MiB (DDR2, 32-bit, ECC off, 266.667 MHz) > Flash: 8 MiB > NAND: 32 MiB > PCIE0: No link > PCIE1: No link > In: serial > Out: serial > Err: serial > Net: eTSEC0, eTSEC1 > Hit any key to stop autoboot: 0 > => ver > > U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX > powerpc-poky-linux-gcc (GCC) 4.6.3 20111117 (prerelease) > GNU ld (GNU Binutils) 2.22 > => > > Signed-off-by: Paul Gortmaker <paul.gortma...@windriver.com>
Hi Paul, Have you verified that the u-boot image this creates functions properly when flashed to the mpc8315? Last time I tried I bricked the board - and still haven't got around to unbricking it. -- Darren > > diff --git a/meta-yocto/conf/machine/mpc8315e-rdb.conf > b/meta-yocto/conf/machine/mpc8315e-rdb.conf > index d3a5b1c..74ef611 100644 > --- a/meta-yocto/conf/machine/mpc8315e-rdb.conf > +++ b/meta-yocto/conf/machine/mpc8315e-rdb.conf > @@ -7,6 +7,9 @@ require conf/machine/include/tune-ppc603e.inc > > KERNEL_IMAGETYPE = "uImage" > > +EXTRA_IMAGEDEPENDS += "u-boot" > +UBOOT_MACHINE_mpc8315e-rdb = "MPC8315ERDB_config" > + > SERIAL_CONSOLE = "115200 ttyS0" > > MACHINE_FEATURES = "kernel26 keyboard pci ext2 ext3 serial" -- Darren Hart Intel Open Source Technology Center Yocto Project - Linux Kernel _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto