On 12-01-27 12:11 PM, Darren Hart wrote: > > > On 01/27/2012 08:22 AM, Paul Gortmaker wrote: >> Valdiated on v2011.12 with hardware: >> >> U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX >> >> Reset Status: Software Hard, External/Internal Soft, External/Internal >> Hard >> >> CPU: e300c3, MPC8315E, Rev: 1.2 at 400 MHz, CSB: 133.333 MHz >> Board: Freescale MPC8315ERDB Rev 1.0 >> I2C: ready >> DRAM: 128 MiB (DDR2, 32-bit, ECC off, 266.667 MHz) >> Flash: 8 MiB >> NAND: 32 MiB >> PCIE0: No link >> PCIE1: No link >> In: serial >> Out: serial >> Err: serial >> Net: eTSEC0, eTSEC1 >> Hit any key to stop autoboot: 0 >> => ver >> >> U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX >> powerpc-poky-linux-gcc (GCC) 4.6.3 20111117 (prerelease) >> GNU ld (GNU Binutils) 2.22 >> => >> >> Signed-off-by: Paul Gortmaker <paul.gortma...@windriver.com> > > Hi Paul, > > Have you verified that the u-boot image this creates functions properly > when flashed to the mpc8315? Last time I tried I bricked the board - and
Was there a specific functional test that you had in mind? I ask that, since for a basic overall "does it work" type question, I think I covered that in the commit log above. Thanks, Paul. > still haven't got around to unbricking it. > > -- > Darren > >> >> diff --git a/meta-yocto/conf/machine/mpc8315e-rdb.conf >> b/meta-yocto/conf/machine/mpc8315e-rdb.conf >> index d3a5b1c..74ef611 100644 >> --- a/meta-yocto/conf/machine/mpc8315e-rdb.conf >> +++ b/meta-yocto/conf/machine/mpc8315e-rdb.conf >> @@ -7,6 +7,9 @@ require conf/machine/include/tune-ppc603e.inc >> >> KERNEL_IMAGETYPE = "uImage" >> >> +EXTRA_IMAGEDEPENDS += "u-boot" >> +UBOOT_MACHINE_mpc8315e-rdb = "MPC8315ERDB_config" >> + >> SERIAL_CONSOLE = "115200 ttyS0" >> >> MACHINE_FEATURES = "kernel26 keyboard pci ext2 ext3 serial" > _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto