Yocto packed for Freescale provided by fsl-community-bsp-platform<https://github.com/Freescale/fsl-community-bsp-platform> uses an own setup-environment script, I put
IMAGE_FSTYPES = "tar.bz2 ext3 sdcard" * * as the last configuration in this file and now it works and hob can generate sdcard files. Giovanni -- Dott. Ing. Giovanni Foiani Cell: +39-349-3577515 Phone: +39-0532-97-4106 mail: giovanni.foi...@unife.it CenTec - Corso Guercino, 47 - 44042 Cento (FE) On Wed, Jul 25, 2012 at 2:51 PM, Giovanni Foiani <fno...@unife.it> wrote: > I found in *meta-fsl-arm/conf/machine/include/imx-base.inc *the following > configuration: > > *IMAGE_FSTYPES ?= "tar.bz2 ext3 sdcard"* > > Hence, according to this configuration, .sdcard file should be created but > pparently > it is overwritten somewhere else... > > I also found the configuration to reduce sdcard file size which is into * > meta-fsl-arm/classes/image_types_fsl.bbclass.* > > I reduced SDCARD_SIZE from 3.4GB to 1GB > # Default to 1.0GiB images > *SDCARD_SIZE ?= "1000"* > * > * > I'm using Yocto packed for Freescale provided by > fsl-community-bsp-platform<https://github.com/Freescale/fsl-community-bsp-platform> > and I'm > building the image using Hob but I can't find sdcard as output format in > the graphic interface.... > > Where is the right point to place* *IMAGE_FSTYPES configuration? > > Thanks > > Giovanni > -- > > Dott. Ing. Giovanni Foiani > > Cell: +39-349-3577515 > Phone: +39-0532-97-4106 > mail: giovanni.foi...@unife.it > CenTec - Corso Guercino, 47 - 44042 Cento (FE) > > > > On Wed, Jul 25, 2012 at 11:07 AM, Giovanni Foiani <fno...@unife.it> wrote: > >> Please look at my notes below.. >> >> Thanks >> >> Giovanni >> -- >> >> Dott. Ing. Giovanni Foiani >> >> Cell: +39-349-3577515 >> Phone: +39-0532-97-4106 >> mail: giovanni.foi...@unife.it >> CenTec - Corso Guercino, 47 - 44042 Cento (FE) >> >> >> >> On Wed, Jul 25, 2012 at 10:56 AM, Andrei Gherzan <and...@gherzan.ro>wrote: >> >>> On Wed, Jul 25, 2012 at 11:43 AM, Giovanni Foiani <fno...@unife.it>wrote: >>> >>>> Hi, >>>> >>>> I built some images using the latest Yocto release (with Hob) on a >>>> Ubuntu 10.04 32 bit, but when the process finishes (with success) I can't >>>> find .sdcard files into "*tmp/deploy/images*" folder. >>>> >>> >>> Not all images create .sdcard files. What image are you talking about? >>> sd images are used for machines like imx / rpi where rootfs and/or kernel >>> and/or boot-loader are used from sd. In qemu ext3 images are used for >>> rootfs and kernel loaded separately. >>> >>> >> >> I'm building images for iMX53QSB so my situation is where rootfs and/or >> kernel and/or boot-loader are used from sd card. >> I'm trying to build a qt4-demo-image, do I have to put any configuration >> into qt4-demo-image.bb to enable .sdcard creation? >> >> >>> Some time ago I built some other images using a Ubuntu 11.04 32 bit and >>>> .sdcard files were created properly. >>>> Could it be a problem of max file size in Ubuntu 10.04? >>>> Another question...sdcard files that I built using Ubuntu 11.04 (32 >>>> bit) were about 3 GByte, is there a way or configuration to reduce this >>>> size? >>>> >>>> Yes. Use a compression extension. For example sdcard.xz. >>> >> >> Is this also a qt4-demo-image.bb configuration to set? >> >> Thanks >> >>> >>> ag >>> >> >> >
_______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto