Hi Maxin, I have added three folder “meta-aarch64”, “meta-linaro” and “meta-linaro-toolchain” under my poky directory. I also have updated my bblayer.conf with:- BBLAYERS ?= " \ /home/atulk/yocto/poky-master/meta \ /home/atulk/yocto/poky-master/meta-yocto \ /home/atulk/yocto/poky-master/meta-yocto-bsp \ /home/atulk/yocto/poky-master/meta-aarch64 \ /home/atulk/yocto/poky-master/meta-linaro \ /home/atulk/yocto/poky-master/meta-linaro-toolchain \ " And local.conf MACHINE ??= "genericarmv8" But while building bitbake with meta-toolchain for aarch64 support, I am getting error as “ERROR: Layer 'linaro' depends on layer 'networking-layer', but this layer is not enabled in your configuration”. Do you have any comments about building the same. Also please note that I don’t need any external toolchain support as I wish to build my own toolchain.
Thanks and Regards, ATUL KUMAR SINGH On 8 Jul 2014 19:52, "Maxin B. John" <maxin.j...@enea.com> wrote: > Hi Atul, > > On Tue, Jul 08, 2014 at 07:43:03PM +0530, atulkumar singh wrote: > > Hi Fathi and Maxin, > > > > Thanks as you are helping me in sorting out my issue for Aarch64 support > in > > meta-toolchain while building bitbake for yocto. > > And "not working" means if we go into the machine/layer/recipes link and > under > > the meta-aarch64 layer the git repository link which is mention is not > working. > > Please let me know with your valuable suggestion. > > The "meta-aarch64" is present in "meta-linaro" repository. > Clone meta-linaro : > > # git clone git://git.linaro.org/openembedded/meta-linaro.git > # cd meta-linaro/meta-aarch64 > > > Thanks and regards, > > Atul > > > > On 8 Jul 2014 18:14, "Fathi Boudra" <fathi.bou...@linaro.org> wrote: > > > > On 8 July 2014 13:27, atulkumar singh <atul.singh...@gmail.com> > wrote: > > Best Regards, > Maxin > <snip> >
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto