Hi Atul, On Wed, Jul 09, 2014 at 06:16:31PM +0530, atulkumar singh wrote: > Hi Maxin, > > I have added three folder “meta-aarch64”, “meta-linaro” and > “meta-linaro-toolchain” under my poky directory. > I also have updated my bblayer.conf with:- > BBLAYERS ?= " \ > /home/atulk/yocto/poky-master/meta \ > /home/atulk/yocto/poky-master/meta-yocto \ > /home/atulk/yocto/poky-master/meta-yocto-bsp \ > /home/atulk/yocto/poky-master/meta-aarch64 \ > /home/atulk/yocto/poky-master/meta-linaro \ > /home/atulk/yocto/poky-master/meta-linaro-toolchain \ > " > And local.conf MACHINE ??= "genericarmv8" > But while building bitbake with meta-toolchain for aarch64 support, I am > getting error as “ERROR: Layer 'linaro' depends on layer 'networking-layer', > but this layer is not enabled in your configuration”. This means, you need meta-openembedded to build it. Add these in your bblayer.conf:
meta-openembedded/meta-networking meta-openembedded/meta-oe > Do you have any comments about building the same. > Also please note that I don’t need any external toolchain support as I wish to > build my own toolchain. > > Thanks and Regards, > ATUL KUMAR SINGH Best Regards, Maxin > > On 8 Jul 2014 19:52, "Maxin B. John" <maxin.j...@enea.com> wrote: <snip> -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto