Layers : BBLAYERS ?= " \ /home/fil/Pulpit/yocto/poky/meta \ /home/fil/Pulpit/yocto/poky/meta-yocto \ /home/fil/Pulpit/yocto/poky/meta-beagleboard/common-bsp \ /home/fil/Pulpit/yocto/poky/meta-openembedded/meta-oe \ /home/fil/Pulpit/yocto/poky/meta-beagleboard/meta-beagleboard-extras \ /home/fil/Pulpit/yocto/poky/meta-hello \ "
I can't open serial console. 2014-09-10 20:33 GMT+02:00 Maciej Borzecki <maciej.borze...@open-rnd.pl>: > On 09/10 18:39, TakkTakk wrote: >> yocto buit with INSANE_SKIP_${PN} += "installed-vs-shipped" with no error. >> then i copied: >> cp MLO /media/boot/MLO >> cp u-boot-beaglebone.img /media/boot/u-boot.img >> sudo tar -xvf core-image-base-beaglebone.tar.gz -C /media/root/ >> >> then, inserted microSD card to Beaglebone Black and bbb not boot. 4 >> led lit steadily and nothing happens. I have cable hdmi connected to >> monitor. >> >> then i did >> $ cp uImage /media/boot >> $ mkdir /media/boot/dtbs >> $ cp uImage-am335x-boneblack.dtb /media/boot/dtbs/am335x-boneblack.dtb >> >> $ cp uEnv.txt /media/boot >> >> uEnv.txt from here >> http://www.embarcados.com.br/beaglebone-black-yocto/ but i changed >> zImage to uImage and still I can not boot the SD Card on the Beagle. >> All four LEDs stay lit steadily. >> What am i doing wrong? > > Can you list the layers enabled in your build and post serial console > output? > > Issues that I've seen so far: > - SD card layout (even block count of boot partition, try checking > meta-ti archive for my posts) > - uboot not restoring partition sizes (but I've only seen it on meta-ti > master, Peter Bigot posted a patch that fixed the problem, AFAIK the > patch should already be meta-ti, affected uboot 2014.07) > - kernel overwriting device tree in mem, > https://bugzilla.yoctoproject.org/show_bug.cgi?id=6165 but apparently > it's already fixed in master & 1.6.1 > >> >> >> 2014-09-09 19:28 GMT+02:00 Diego Sueiro <diego.sue...@gmail.com>: >> > >> > On Tue, Sep 9, 2014 at 12:53 PM, tomek82221 Gazeta.pl >> > <tomek82...@gazeta.pl> >> > wrote: >> >> >> >> ok, but where i can add INSANE_SKIP_${PN} += "installed-vs-shipped" >> >> in meta-beagleboard/common-bsp/recipes-kernel/linux/linux-mainline_3.8.bb >> >> ? >> >> or create >> >> meta-beagleboard/common-bsp/recipes-kernel/linux/linux-mainline_3.8.bbappend >> >> ? >> >> >> >> thanks for your help >> > >> > >> > Both will work. >> > >> > >> > Regards, >> > >> > -- >> > *dS >> > Diego Sueiro >> > >> > Administrador do Embarcados >> > www.embarcados.com.br >> > >> > /*long live rock 'n roll*/ >> >> >> >> -- >> TakTak >> -- >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto > > -- > Maciej Borzęcki > Senior Software Developer at Open-RnD Sp. z o.o., Poland > www.open-rnd.pl > mobile: +48 889 117 365, fax: +48 42 657 9079 > > > Niniejsza wiadomość wraz z załącznikami może > zawierać chronione prawem lub poufne informacje i została > wysłana wyłącznie do wiadomości i użytku osób, do których > została zaadresowana. Jeśli wiadomość została otrzymana > przypadkowo zabrania się jej kopiowania lub rozsyłania do osób > trzecich. W takim przypadku uprasza się o natychmiastowe > zniszczenie wiadomości oraz poinformowanie nadawcy o > zaistniałej sytuacji za pomocą wiadomości zwrotnej. > Dziękujemy. > > This message, including any attachments hereto, > may contain privileged or confidential information and is sent > solely for the attention and use of the intended addressee(s). > If you are not an intended addressee, you may neither use this > message nor copy or deliver it to anyone. In such case, you > should immediately destroy this message and kindly notify the > sender by reply email. Thank you. -- TakTak -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto