Yes I have ubuntu on eMMC, when i don't press S2 ubuntu will be boot. When i press switch S2 yocto don't boot and LED USR0 , USR1, USR2, USR3 stay lit steadily. I boot yocto 1.6 (but without layer meta-beagleboard) on sdcard and everything was ok.
2014-09-11 11:19 GMT+02:00 Diego Sueiro <diego.sue...@gmail.com>: > TakTak, > > On Wed, Sep 10, 2014 at 1:39 PM, TakkTakk <tomek82...@gazeta.pl> wrote: >> >> yocto buit with INSANE_SKIP_${PN} += "installed-vs-shipped" with no error. >> then i copied: >> cp MLO /media/boot/MLO >> cp u-boot-beaglebone.img /media/boot/u-boot.img >> sudo tar -xvf core-image-base-beaglebone.tar.gz -C /media/root/ >> >> then, inserted microSD card to Beaglebone Black and bbb not boot. 4 >> led lit steadily and nothing happens. I have cable hdmi connected to >> monitor. >> >> then i did >> $ cp uImage /media/boot >> $ mkdir /media/boot/dtbs >> $ cp uImage-am335x-boneblack.dtb /media/boot/dtbs/am335x-boneblack.dtb >> >> $ cp uEnv.txt /media/boot >> >> uEnv.txt from here >> http://www.embarcados.com.br/beaglebone-black-yocto/ but i changed >> zImage to uImage and still I can not boot the SD Card on the Beagle. >> All four LEDs stay lit steadily. >> What am i doing wrong? > > > Do you have another image installed on eMMC? If yes try to power up the > board with sdcard inserted and the switch S2 pressed (near sdcard slot). > > > Regards, > > -- > *dS > Diego Sueiro > > Administrador do Embarcados > www.embarcados.com.br > > /*long live rock 'n roll*/ -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto