Thanks! As for the examples. I cannot help directly, but i would read log.do_configure etc. files for details. You might find the reason there. Although I have to say, that my knowledge in yocto is at the beginners stadium at the moment ;-)
cheers simon :-) On Sun, Feb 1, 2015 at 6:10 PM, Alex J Lennon <ajlen...@dynamicdevices.co.uk > wrote: > > On 31/01/2015 19:10, peterengcomau...@adam.com.au wrote: > > > > Hi Alex, > > > > Thanks for confirming the problem exists. > > I set QT_MODULE_BRANCH ?= "dev" in > > meta-qt5/recipes-qt/qt5/qt5-git.inc, but still get the same problem. > > Do I have the correct file ? > > Lachlan, > > So I have been building for qemux86 with dizzy, > > Build Configuration: > BB_VERSION = "1.24.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "Ubuntu-14.04" > TARGET_SYS = "i586-poky-linux" > MACHINE = "qemux86" > DISTRO = "poky" > DISTRO_VERSION = "1.7.1" > TUNE_FEATURES = "m32 i586" > TARGET_FPU = "" > meta > meta-yocto = "dizzy:9fc095a439c36014c73b3a8f240afba09fe0e4d7" > meta-oe > meta-efl > meta-webserver > meta-networking = "dizzy:200f6cafc878d4c26871fc56d21ecc8eaa9aa61b" > meta-mono = "master:b73fc7c525cc0068b2ed84fc26b5d2d4d87c6c12" > meta-gnome > meta-efl = "dizzy:200f6cafc878d4c26871fc56d21ecc8eaa9aa61b" > meta-browser.master = "master:14e4829d716db416f62403ddd0941ab97491d707" > meta-ruby > meta-python = "dizzy:200f6cafc878d4c26871fc56d21ecc8eaa9aa61b" > meta-qt5.dizzy = "dizzy:8b0ffbd849203d07164ccfad2535bdb107eecd08" > > local.conf is here http://pastebin.com/0t2GFWhu > bblayers.conf is here http://pastebin.com/CK6dF9f5 > > Build command is > > bitbake -k core-image-minimal > > So this fails a few times building, which seems to be related to gcc > issues, and I've seen on and off for some time. > > Afer a few restarts I get to the point where most of it is built and I have > > ERROR: Function failed: do_configure (log file is located at > > /data_drive/imx6/rootfs_builder/qemux86.dizzy/tmp/work/i586-poky-linux/qtwebkit-examples/5.3.2-r0/temp/log.do_configure.26328) > ERROR: Logfile of failure stored in: > > /data_drive/imx6/rootfs_builder/qemux86.dizzy/tmp/work/i586-poky-linux/qtwebkit-examples/5.3.2-r0/temp/log.do_configure.26328 > > ERROR: Task 842 > (/data_drive/imx6/rootfs_builder/sources/meta-qt5.dizzy/recipes-qt/qt5/ > qtwebkit-examples_5.3.2.bb, > do_configure) failed with exit code '1' > WARNING: Failed to fetch URL > git://qt.gitorious.org/qt/qtsystems.git;branch=5.3, attempting MIRRORS > if available > ERROR: Fetcher failure: Unable to find revision > aa651c73bf7bc57c1b6b1bfcfa9afe901884a102 in branch 5.3 even from upstream > ERROR: Function failed: Fetcher failure for URL: > 'git://qt.gitorious.org/qt/qtsystems.git;branch=5.3'. Unable to fetch > URL from any source. > ERROR: Logfile of failure stored in: > > /data_drive/imx6/rootfs_builder/qemux86.dizzy/tmp/work/i586-poky-linux/qtsystems/5.3.99+5.4.0-beta1+gitAUTOINC+aa651c73bf-r0/temp/log.do_fetch.26325 > ERROR: Task 756 > (/data_drive/imx6/rootfs_builder/sources/meta-qt5.dizzy/recipes-qt/qt5/ > qtsystems_git.bb, > do_fetch) failed with exit code '1' > > ... > > Note from the above that qtbase has built ok without modifications to > meta-qt5 > > To double check the qtbase and also to get qtwebkit building I > > bitbake -f -c cleansstate qtbase > bitbake qtbase > > This builds OK > > ... > > Then > > bitbake -k core-image-minimal > > Gives > > ERROR: Task 843 > (/data_drive/imx6/rootfs_builder/sources/meta-qt5.dizzy/recipes-qt/qt5/ > qtwebkit-examples_5.3.2.bb, > do_compile) failed with exit code '1' > WARNING: Failed to fetch URL > git://qt.gitorious.org/qt/qtsystems.git;branch=5.3, attempting MIRRORS > if available > ERROR: Fetcher failure: Unable to find revision > aa651c73bf7bc57c1b6b1bfcfa9afe901884a102 in branch 5.3 even from upstream > ERROR: Function failed: Fetcher failure for URL: > 'git://qt.gitorious.org/qt/qtsystems.git;branch=5.3'. Unable to fetch > URL from any source. > ERROR: Logfile of failure stored in: > > /data_drive/imx6/rootfs_builder/qemux86.dizzy/tmp/work/i586-poky-linux/qtsystems/5.3.99+5.4.0-beta1+gitAUTOINC+aa651c73bf-r0/temp/log.do_fetch.21451 > ERROR: Task 756 > (/data_drive/imx6/rootfs_builder/sources/meta-qt5.dizzy/recipes-qt/qt5/ > qtsystems_git.bb, > do_fetch) failed with exit code '1' > > ... > > Changing the branch in qtsystems_git gets qtsystems building > > #QT_MODULE_BRANCH = "5.3" > QT_MODULE_BRANCH = "dev" > > ... > > I then removed the qtwebkit examples from local.conf as there's some > strange linker problem there > > # qtwebkit-examples-examples \ > > I then had to remove the qt examples packages as for some reason they > aren't getting built at all > > # qtbase-examples \ > > ... > > That gets me to the point I get a dizzy root filesystem built. Next I > need to understand why I am not getting the examples packages built. > > Hope that helps somewhat. > > Cheers, > > Alex > >
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
