Hi Alex, I have no problem with qt5 with daisy and have been using it fine for over 6 months. During that time I have cleaned my tmp file multiple times which would force a new reload of the sources. Also I dont have a problem with Dizzy when building core-image-mininal, core-image-full-cmdline and core-image-sato.
My problems occur when i explicitly use qt5 as follows: IMAGE_INSTALL += " qtbase qtbase-fonts qtbase-plugins qtbase-tools qtmultimedia qtmultimedia-plugins qtmultimedia-qmlplugins qtsvg qtsvg-plugins qtsensors qtsystems qtsystems-tools qtsystems-qmlplugins qtscript qtgraphicaleffects-qmlplugins qtconnectivity-qmlplugins qtlocation-plugins qtlocation-qmlplugins qtdeclarative qtdeclarative-qmlplugins qtdeclarative-plugins qtquick1 qtquick1-qmlplugins qtquick1-plugins qtwebkit qtwebkit-qmlplugins " If i bitbake my recipe using the -k option, I only get 3 failed recipes 0: qtbase-native-5.4.0-r0 do_fetch (pid 13279) 1: qtbase-5.4.0-r0 do_fetch (pid 13280) 2: qtdeclarative-5.4.0-r0 do_fetch (pid 13283) and these relate two 2 failed fetchs: ERROR: Function failed: Fetcher failure for URL: 'http://download.qt-project.org/official_releases/qt/5.4/5.4.0/submodules/qtdeclarative-opensource-src-5.4.0.tar.xz'. Unable to fetch URL from any source. ERROR: Function failed: Fetcher failure for URL: 'http://download.qt-project.org/official_releases/qt/5.4/5.4.0/submodules/qtbase-opensource-src-5.4.0.tar.xz'. Unable to fetch URL from any source. These take a few minutes to fail, so it seems as if they can identify the file in the source but cant get it to download. Howeve, i can downlod them nanually without any problems. I originally had qtwebkit errors but after many builds , this is finally gone. I dont have problems with teh examples because they are not in my recipe. At present I really dont know how to proceeed. Regards Lachlan ----- Original Message ----- From: "Alex J Lennon" To:, "Martin Jansa" , "Simon Bolek" Cc: Sent:Sun, 01 Feb 2015 18:10:44 +0100 Subject:Re: [yocto] meta-qt5 problem in yocto 1.7 On 31/01/2015 19:10, peterengcomau...@adam.com.au wrote: > > Hi Alex, > > Thanks for confirming the problem exists. > I set QT_MODULE_BRANCH ?= "dev" in > meta-qt5/recipes-qt/qt5/qt5-git.inc, but still get the same problem. > Do I have the correct file ? Lachlan, So I have been building for qemux86 with dizzy, Build Configuration: BB_VERSION = "1.24.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Ubuntu-14.04" TARGET_SYS = "i586-poky-linux" MACHINE = "qemux86" DISTRO = "poky" DISTRO_VERSION = "1.7.1" TUNE_FEATURES = "m32 i586" TARGET_FPU = "" meta meta-yocto = "dizzy:9fc095a439c36014c73b3a8f240afba09fe0e4d7" meta-oe meta-efl meta-webserver meta-networking = "dizzy:200f6cafc878d4c26871fc56d21ecc8eaa9aa61b" meta-mono = "master:b73fc7c525cc0068b2ed84fc26b5d2d4d87c6c12" meta-gnome meta-efl = "dizzy:200f6cafc878d4c26871fc56d21ecc8eaa9aa61b" meta-browser.master = "master:14e4829d716db416f62403ddd0941ab97491d707" meta-ruby meta-python = "dizzy:200f6cafc878d4c26871fc56d21ecc8eaa9aa61b" meta-qt5.dizzy = "dizzy:8b0ffbd849203d07164ccfad2535bdb107eecd08" local.conf is here http://pastebin.com/0t2GFWhu bblayers.conf is here http://pastebin.com/CK6dF9f5 Build command is bitbake -k core-image-minimal So this fails a few times building, which seems to be related to gcc issues, and I've seen on and off for some time. Afer a few restarts I get to the point where most of it is built and I have ERROR: Function failed: do_configure (log file is located at /data_drive/imx6/rootfs_builder/qemux86.dizzy/tmp/work/i586-poky-linux/qtwebkit-examples/5.3.2-r0/temp/log.do_configure.26328) ERROR: Logfile of failure stored in: /data_drive/imx6/rootfs_builder/qemux86.dizzy/tmp/work/i586-poky-linux/qtwebkit-examples/5.3.2-r0/temp/log.do_configure.26328 ERROR: Task 842 (/data_drive/imx6/rootfs_builder/sources/meta-qt5.dizzy/recipes-qt/qt5/qtwebkit-examples_5.32.bb, do_configure) failed with exit code '1' WARNING: Failed to fetch URL git://qt.gitorious.org/qt/qtsystems.git;branch=5.3, attempting MIRRORS if available ERROR: Fetcher failure: Unable to find revision aa651c73bf7bc57c1b6b1bfcfa9afe901884a102 in branch 5.3 even from upstream ERROR: Function failed: Fetcher failure for URL: 'git://qt.gitorious.org/qt/qtsystems.git;branch=5.3'. Unable to fetch URL from any source. ERROR: Logfile of failure stored in: /data_drive/imx6/rootfs_builder/qemux86.dizzy/tmp/work/i586-poky-linux/qtsystems/5.3.99+5.4.0-beta1+gitAUTOINC+aa651c73bf-r0/temp/log.do_fetch.26325 ERROR: Task 756 (/data_drive/imx6/rootfs_builder/sources/meta-qt5.dizzy/recipes-qt/qt5/qtsystems_git.bb, do_fetch) failed with exit code '1' ... Note from the above that qtbase has built ok without modifications to meta-qt5 To double check the qtbase and also to get qtwebkit building I bitbake -f -c cleansstate qtbase bitbake qtbase This builds OK ... Then bitbake -k core-image-minimal Gives ERROR: Task 843 (/data_drive/imx6/rootfs_builder/sources/meta-qt5.dizzy/recipes-qt/qt5/qtwebkit-examples_5.3.2.bb, do_compile) failed with exit code '1' WARNING: Failed to fetch URL git://qt.gitorious.org/qt/qtsystems.git;branch=5.3, attempting MIRRORS if available ERROR: Fetcher failure: Unable to find revision aa651c73bf7bc57c1b6b1bfcfa9afe901884a102 in branch 5.3 even from upstream ERROR: Function failed: Fetcher failure for URL: 'git://qt.gitorious.org/qt/qtsystems.git;branch=5.3'. Unable to fetch URL from any source. ERROR: Logfile of failure stored in: /data_drive/imx6/rootfs_builder/qemux86.dizzy/tmp/work/i586-poky-linux/qtsystems/5.3.99+5.4.0-beta1+gitAUTOINC+aa651c73bf-r0/temp/log.do_fetch.21451 ERROR: Task 756 (/data_drive/imx6/rootfs_builder/sources/meta-qt5.dizzy/recipes-qt/qt5/qtsystems_git.bb, do_fetch) failed with exit code '1' ... Changing the branch in qtsystems_git gets qtsystems building #QT_MODULE_BRANCH = "5.3" QT_MODULE_BRANCH = "dev" ... I then removed the qtwebkit examples from local.conf as there's some strange linker problem there # qtwebkit-examples-examples I then had to remove the qt examples packages as for some reason they aren't getting built at all # qtbase-examples ... That gets me to the point I get a dizzy root filesystem built. Next I need to understand why I am not getting the examples packages built. Hope that helps somewhat. Cheers, Alex and ---- Message sent via Adam Internet WebMail - http://www.adam.com.au/
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto