Hi Todor, It is an autotool based example. It is not generated makefile itself.
I attached the makefile.in and makefile.am file to the paste bin. Thanks, Raghavendra. ________________________________________ From: Minchev, Todor <todor.minc...@intel.com> Sent: Friday, May 15, 2015 4:41 PM To: Raghavendra Kakarla Cc: yocto@yoctoproject.org Subject: Re: [yocto] Issue with yocto ADT Hello Raghavendra, Could you please pastebin the makefile from your project? http://pastebin.com/ Cheers, Todor On Fri, 2015-05-15 at 10:47 +0000, Raghavendra Kakarla wrote: > Hi Todor, > > Thank you for your reply. > > By default we have the setting like this only. > > But we got the error. > > Thanks, > Raghavendra. > ________________________________________ > From: Minchev, Todor <todor.minc...@intel.com> > Sent: Friday, May 15, 2015 4:05 PM > To: Raghavendra Kakarla > Cc: yocto@yoctoproject.org > Subject: Re: [yocto] Issue with yocto ADT > > Hello Raghavendra, > > Please try the following: > > Right click on your project - Properties - C/C++ Build - Select the > 'Behavior' tab - untick 'Build on resource save' and remove 'all' from > the 'Build' field > > Cheers, > Todor > > On Fri, 2015-05-15 at 09:32 +0000, Raghavendra Kakarla wrote: > > Hi All, > > > > > > I have problem with the ADT while i am building the autotool example > > helloword project which is given in the "yocto ADT autotool project". > > > > > > Could you please help me in resolving this issue. > > > > > > I followed the following steps for installing the adt in my > > development PC: > > > > > > > > I built the toolchain using the following command: > > > > $cd ~/poky > > $source ./oe-init-build-env > > $bitbake meta-ide-support > > > > > > Extract the root file system by using the following commands: > > > > $cd ~ > > $source ~/poky/build/tmp/environment-setup-mips32r2el-poky-linux > > $runqemu-extract-sdk \ > > ~/poky/build/tmp/deploy/images/arqlyn/ > > core-image-minimal-dhruwa_ioe-20150511102759.rootfs.tar.bz2\ > > $HOME/arqlyn > > > > I followed the command given in the yocto project dev-manual for > > installing eclipse and adding yocto plugin to eclipse. > > > > I Gave the following data to the eclipse for configuring the > > cross-compiler options: > > > > 1. I select the "Build System Derived Toolchain" > > 2.point the toolchain path to "home/testuser/poky/build" > > 3.gave sysroot path to /home/testuser/arqlyn > > > > After entered this information I got the my machine-name in the > > "select the target architecture" filed. > > > > After this I create a autotool support project and tried to build but > > it gives the error. > > > > Regards, > > > > Raghavendra. > > > > > > > > -- > > _______________________________________________ > > yocto mailing list > > yocto@yoctoproject.org > > https://lists.yoctoproject.org/listinfo/yocto > -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto