This is in the package: udev-extraconf
On your system look here:
/etc/udev/rules.d/automount.rules
In this file, you'll find the following rules.
The second one auto unmounts.
SUBSYSTEM=="block", ACTION=="add" RUN+="/etc/udev/scripts/mount.sh"
SUBSYSTEM=="block", ACTION=="remove" RUN+="/etc/udev/scripts/mount.sh"
SUBSYSTEM=="block", ACTION=="change",
ENV{DISK_MEDIA_CHANGE}=="1" RUN+="/etc/udev/scripts/mount.sh"
________________________________________
From: yocto-boun...@yoctoproject.org <yocto-boun...@yoctoproject.org> on behalf
of Paul D. DeRocco <pdero...@ix.netcom.com>
Sent: Tuesday, September 22, 2015 10:45 AM
To: 'Mantas Mikulenas'; yocto@yoctoproject.org
Subject: Re: [yocto] [systemd-devel] How to automount
> From: Mantas Mikulenas [mailto:graw...@gmail.com]
>
> > I don't think there's any way to have something auto-unmount
>
> There certainly is - udev has been unmounting unplugged
> drives for many years. It's done by default.
If creating a udev mount rule automatically does the unmount, then the
simplest thing for me would probably be to do that, and have my
application do a sync after each user-initiated operation. That way, the
drive would remain mounted after the operation, so I could still poke
around on it while debugging, yet there would be no corruption when it's
removed. Thanks for the tip.
--
Ciao, Paul D. DeRocco
Paul mailto:pdero...@ix.netcom.com
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
