Hello list, I am using wic to generate partitioned yocto images. After I boot such an Image, I see two added entrys in my /etc/fstab wich are not correct.
cat /etc/fstab # # /etc/fstab: static file system information # # <file system> <dir> <type> <options> <dump> <pass> /dev/root / auto defaults 1 1 proc /proc proc defaults 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 usbdevfs /proc/bus/usb usbdevfs noauto 0 0 /dev/mmcblk0p5 /rwfs auto defaults 0 0 #/dev/mmcblk0p3 /rescue ext3 defaults 0 0 /dev/mmcblk0p5 /data ext3 defaults 0 0 tmpfs /run tmpfs mode=0755,nodev,nosuid,strictatime 0 0 tmpfs /var/volatile tmpfs defaults 0 0 tmpfs /var/cache tmpfs defaults 0 0 tmpfs /var/lib tmpfs defaults 0 0 tmpfs /var/spool tmpfs defaults 0 0 tmpfs /var/apache2/logs tmpfs defaults 0 0 /dev/mmcblkp3 /rescue ext3 defaults 0 0 /dev/mmcblkp5 /data ext3 defaults 0 0 the last two lines are added by the wic tool. Here is the 0 missing. If I add these 0 to my wks --ondisk mmcblk option wic is complaining. So I`am just using is like in this wks disk layout: # short-description: Create SD card image with a boot partition # long-description: # Create an image that can be written onto a SD card using dd for use # with i.MX SoC family. # It uses SPL and u-boot # # The disk layout used is: # - ----- --------- ---------- -------- --------- ---------- ------------ # | | SPL | u-boot | /boot1 | /boot2 | rootfs1 | rootfs2 | data | # - ----- --------- ---------- -------- --------- ---------- ------------ # ^ ^ ^ ^ ^ ^ # | | | | | | # 0 1kiB 69kiB 4MiB 4MiB + 20MiB 4MiB + 8Mib + rootfs1 + rootfs2 + data # part SPL --source rawcopy --sourceparams="file=SPL" --ondisk mmcblk --no-table --align 1 part u-boot --source rawcopy --sourceparams="file=u-boot.img" --ondisk mmcblk --no-table --align 69 part /boot --source bootimg-partition --ondisk mmcblk --fstype=vfat --label boot --active --align 4096 --size 20M --extra-space 0 #part /boot2 --source bootimg-partition --ondisk mmcblk --fstype=vfat --label boot2 --active --align 4096 --size 8M --extra-space 0 part / --source rootfs --ondisk mmcblk --fstype=ext3 --label root --align 4 --size 125 part /rescue --source rootfs --ondisk mmcblk --fstype=ext3 --label secondary --align 4 --size 125 part /data --ondisk mmcblk --fstype=ext3 --label data --align 4 --size 730 Some sugesstions to fix this? Best regards, Oliver -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto