On Wed, Feb 10, 2016 at 11:19 AM, Ed Bartosh <ed.bart...@linux.intel.com> wrote: > Hi Oliver, > > On Tue, Feb 09, 2016 at 09:29:16AM +0100, Oliver Graute wrote: >> # It uses SPL and u-boot >> # >> # The disk layout used is: >> # - ----- --------- ---------- -------- --------- ---------- ------------ >> # | | SPL | u-boot | /boot1 | /boot2 | rootfs1 | rootfs2 | data | >> # - ----- --------- ---------- -------- --------- ---------- ------------ >> # ^ ^ ^ ^ ^ ^ >> # | | | | | | >> # 0 1kiB 69kiB 4MiB 4MiB + 20MiB 4MiB + 8Mib + rootfs1 + rootfs2 + >> data >> # >> part SPL --source rawcopy --sourceparams="file=SPL" --ondisk mmcblk >> --no-table --align 1 >> part u-boot --source rawcopy --sourceparams="file=u-boot.img" --ondisk >> mmcblk --no-table --align 69 >> part /boot --source bootimg-partition --ondisk mmcblk --fstype=vfat --label >> boot --active --align 4096 --size 20M --extra-space 0 >> #part /boot2 --source bootimg-partition --ondisk mmcblk --fstype=vfat >> --label boot2 --active --align 4096 --size 8M --extra-space 0 >> part / --source rootfs --ondisk mmcblk --fstype=ext3 --label root --align 4 >> --size 125 >> part /rescue --source rootfs --ondisk mmcblk --fstype=ext3 --label secondary >> --align 4 --size 125 >> part /data --ondisk mmcblk --fstype=ext3 --label data --align 4 --size 730 >> >> Some sugesstions to fix this? > How exactly wic complains if you use --ondisk mmcblk0 ? > > It worked for me with this .wks: > part /boot --source bootimg-pcbios --ondisk mmcblk0 --label boot --active > --align 1024 > part / --source rootfs --ondisk mmcblk0 --fstype=ext3 --label root --align > 1024 > part /rescue --source rootfs --ondisk mmcblk0 --fstype=ext3 --label secondary > --align 4 --size 125 > part /data --ondisk mmcblk0 --fstype=ext3 --label data --align 4 --size 730 > > bootloader --timeout=0 --append="rootwait rootfstype=ext3 console=tty0" > > and produced these 2 lines in fstab: > /dev/mmcblk0p3 /rescue ext3 defaults 0 0 > /dev/mmcblk0p5 /data ext3 defaults 0 0 > > If you provide more info about your setup(layers used?) I can try to > reproduce it and fix the issue. > Creating bug in https://bugzilla.yoctoproject.org would be great too.
Hello Ed, it is working now with --ondisk mmcblk0. I'am not sure why it didn't worked before. I can't reproduce it anymore. Thx for your help and sorry for the noise. best regards, Oliver -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto