:(
On 12 September 2017 at 14:09, yahia farghaly <yahiafargh...@gmail.com> wrote: > I have bitbaked rpi-hwup-image for raspberry pi 3 on sd card and connected > the serial ports to *usb to ttl device* . i have set the minicom to > port: /dev/ttyUSB0 > baud rate: 115200 > the image is booting fine and i can see the prompt on the screen but > cannot see in my serial console using minicom. > *is serial enabled by default for this image ? * > i also tried ENABLE_UART = "1" in local.conf but doesn't help. > > how to enable it ? and what the serial device name with respect to > raspberry pi > > thanks, > > -- > Yahia Farghaly > Graduated from Faculty of Engineering - Electronics and Communications > Department at Cairo University. > Linkedin <https://linkedin.com/in/yahiafarghaly> - GitHub > <https://github.com/yahiafarghaly> > > > > > -- Yahia Farghaly Graduated from Faculty of Engineering - Electronics and Communications Department at Cairo University. Linkedin <https://linkedin.com/in/yahiafarghaly> - GitHub <https://github.com/yahiafarghaly>
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
