Hello, Thanks! Could it be a probelem of firmware version ? How can I know what is the zd1211 firmware version I have ?
I have these files under /lib/firmware/zd1211/: ls -al /lib/firmware/zd1211/ total 72 drwxr-xr-x 2 root root 4096 2008-05-14 19:48 . drwxr-xr-x 3 root root 4096 2008-05-06 13:35 .. -rw-r--r-- 1 root root 4018 2007-10-12 14:44 zd1211b_ub -rw-r--r-- 1 root root 5120 2007-10-12 14:44 zd1211b_uph -rw-r--r-- 1 root root 5120 2007-10-12 14:44 zd1211b_uphm -rw-r--r-- 1 root root 5120 2007-10-12 14:44 zd1211b_uphr -rw-r--r-- 1 root root 3584 2007-10-12 14:44 zd1211b_ur -rw-r--r-- 1 root root 4018 2007-10-12 14:44 zd1211_ub -rw-r--r-- 1 root root 5120 2007-10-12 14:44 zd1211_uph -rw-r--r-- 1 root root 5120 2007-10-12 14:44 zd1211_uphm -rw-r--r-- 1 root root 5120 2007-10-12 14:44 zd1211_uphr -rw-r--r-- 1 root root 3584 2007-10-12 14:44 zd1211_ur Regards, Mark On Thu, Jul 10, 2008 at 6:41 PM, Hin-Tak Leung <[EMAIL PROTECTED]> wrote: > It is as it says, can't load firmware. If you had not used this USB nic > on a machine before, it is likely you did not have them installed. > They should be under /lib/firmware/zd1211 . In whatever mode, > the driver still needs the firmware. > > Mark Ryden wrote: >> >> Hello, >> >> I have build and booted the last linux wireless-netx-2.6 tree: >> >> >> ( >> git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6.git) >> >> This tree includes the ad-hoc patch for zd1211rw. >> >> See: >> http://marc.info/?l=linux-wireless&m=121514338914960&w=2 >> >> I tried to run these two actions: >> (I must say that I did not tried this USB nic with other modes before on >> this >> machine): >> >> iwconfig wlan0 mode ad-hoc >> ifconfig wlan0 up >> >> I get: >> SIOCSIFFLAGS: Connection timed out >> >> in in the kernel log I get: >> Jul 10 15:40:53 kernel: usb 1-4: firmware version 0x4330 and device >> bootcode version 0x4810 differ >> Jul 10 15:40:54 kernel: usb 1-4: USB control request for firmware >> upload failed. Error number -110 >> Jul 10 15:40:54 kernel: zd1211rw 1-4:1.0: couldn't load firmware. >> Error number -110 >> >> What should I do ? is it has to do with some firmware mismatch ? >> Any ideas? >> >> lsusb -v shows: >> Bus 001 Device 003: ID 0ace:1211 ZyDAS 802.11b/g USB2 WiFi >> Device Descriptor: >> bLength 18 >> bDescriptorType 1 >> bcdUSB 2.00 >> bDeviceClass 255 Vendor Specific Class >> bDeviceSubClass 255 Vendor Specific Subclass >> bDeviceProtocol 255 Vendor Specific Protocol >> bMaxPacketSize0 64 >> idVendor 0x0ace ZyDAS >> idProduct 0x1211 802.11b/g USB2 WiFi >> bcdDevice 48.10 >> iManufacturer 16 >> iProduct 32 >> iSerial 0 >> bNumConfigurations 1 >> Configuration Descriptor: >> bLength 9 >> bDescriptorType 2 >> wTotalLength 46 >> bNumInterfaces 1 >> bConfigurationValue 1 >> iConfiguration 0 >> bmAttributes 0x80 >> (Bus Powered) >> MaxPower 500mA >> Interface Descriptor: >> bLength 9 >> ... >> >> Regards, >> Mark Ryden >> >> ------------------------------------------------------------------------- >> Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! >> Studies have shown that voting for your favorite open source project, >> along with a healthy diet, reduces your potential for chronic lameness >> and boredom. Vote Now at http://www.sourceforge.net/community/cca08 >> _______________________________________________ >> Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/ >> Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs >> > > ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
