As a first recomendation it would be great that you select where the webgui
will run, for this you can select where the webgui will run in "Settings >
Server",with this configuration the selected interface won't be replicated
if you enable the cluster
Now:
1º disable the cluster from the master node
2º In the master node create a new virtual interface eth1:cl i.ex: eth1:cl
> 10.6.88.53
2.1º. In this point be sure that you can ping from lb1:eth1 to lb2:eth1 and
from lb2:eth1 to lb1:eth1
3º Build your cluster and select the created interface eth1:cl 10.6.88.53
3.1º If you configured a virtual switch for eth1 then you don't need to
configure the cross over cable, then keep it disabled.
BTW: In my favorite configuration cluster service, ssh and webgui are
configured in the same dedicated interface.
Regards
2013/9/11 Luke Duraj <[email protected]>
> Hey Guys
>
> Need a bit of help. I hope I am mailing the correct support Distribution
> list.
>
> I'm a little confused regarding the Heartbeat configuration.
>
> I have two ZEN LB's configured in a cluster.
>
> LB1.
> ETH0: 10.6.14.28
> ETH0:1: 10.6.14.30 (Virtual Host created that will be used for Lync Load
> Balancing, Farms have already been created and the tests are successful)
> ETH1: 10.6.88.51
>
> LB2.
> ETH0: 10.6.14.28
> ETH1: 10.6.88.52
>
> The cluster has been configured over ETH0.
>
> These two servers are hosted in a Virtual Environment within the same
> Chassis. We had a VLAN Created for ETH1 to connect the two LB's to each
> other. (No Swap over Cable).
>
> Now how is the heartbeat configured without the X-over cable? How can I
> configure the LB to use ETH1 for the heartbeat instead of ETH0? I dont want
> unnecessary traffic over ETH0.
>
> Your urgent response will be much appreciated.
>
> Thanks
>
>
> ------------------------------------------------------------------------------
> How ServiceNow helps IT people transform IT departments:
> 1. Consolidate legacy IT systems to a single system of record for IT
> 2. Standardize and globalize service processes across IT
> 3. Implement zero-touch automation to replace manual, redundant tasks
> http://pubads.g.doubleclick.net/gampad/clk?id=51271111&iu=/4140/ostg.clktrk
> _______________________________________________
> Zenloadbalancer-support mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
>
>
--
Load balancer distribution - Open Source Project
http://www.zenloadbalancer.com
Distribution list (subscribe): [email protected]
------------------------------------------------------------------------------
How ServiceNow helps IT people transform IT departments:
1. Consolidate legacy IT systems to a single system of record for IT
2. Standardize and globalize service processes across IT
3. Implement zero-touch automation to replace manual, redundant tasks
http://pubads.g.doubleclick.net/gampad/clk?id=51271111&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
