Hey Emilio
The web interface is currently running across "All Instances". The other option
is *cluster. 10.6.14.28 (which is the current cluster across eth0)
If I create a new Virtual Interface for IP 10.6.88.53 and configure the cluster
over (eth1)10.6.88.51 and 10.6.88.52 what will then happen with the Virtual
host 10.6.14.30?
Will 10.6.14.30 still be accessible? Will the traffic still be load balanced if
the machines connect to it? Mustn't the cluster be configured with the Virtual
IP that will be providing the service?
Thanks
Date: Wed, 11 Sep 2013 11:18:31 +0200
From: [email protected]
To: [email protected]
Subject: Re: [Zenloadbalancer-support] Zen LB Heartbeat Question
As a first recomendation it would be great that you select where the
webgui will run, for this you can select where the webgui will run in "Settings
>
Server",with this configuration the selected interface won't be replicated if
you enable the cluster
Now:
1º disable the cluster from the master node
2º In the master node create a new virtual interface eth1:cl i.ex: eth1:cl >
10.6.88.53
2.1º. In this point be sure that you can ping from lb1:eth1 to lb2:eth1 and
from lb2:eth1 to lb1:eth1
3º Build your cluster and select the created interface eth1:cl 10.6.88.53
3.1º If you configured a virtual switch for eth1 then you don't need to
configure the cross over cable, then keep it disabled.
BTW: In my favorite configuration cluster service, ssh and webgui are
configured in the same dedicated interface.
Regards
2013/9/11 Luke Duraj <[email protected]>
Hey Guys
Need a bit of help. I hope I am mailing the correct support Distribution list.
I'm a little confused regarding the Heartbeat configuration.
I have two ZEN LB's configured in a cluster.
LB1.
ETH0: 10.6.14.28
ETH0:1:
10.6.14.30 (Virtual Host created that will be used for Lync Load
Balancing, Farms have already been created and the tests are successful)
ETH1: 10.6.88.51
LB2.
ETH0: 10.6.14.28
ETH1: 10.6.88.52
The cluster has been configured over ETH0.
These
two servers are hosted in a Virtual Environment within the same
Chassis. We had a VLAN Created for ETH1 to connect the two LB's to each
other. (No Swap over Cable).
Now how is the heartbeat configured
without the X-over cable? How can I configure the LB to use ETH1 for
the heartbeat instead of ETH0? I dont want unnecessary traffic over
ETH0.
Your urgent response will be much appreciated.
Thanks
------------------------------------------------------------------------------
How ServiceNow helps IT people transform IT departments:
1. Consolidate legacy IT systems to a single system of record for IT
2. Standardize and globalize service processes across IT
3. Implement zero-touch automation to replace manual, redundant tasks
http://pubads.g.doubleclick.net/gampad/clk?id=51271111&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
--
Load balancer distribution - Open Source Project
http://www.zenloadbalancer.com
Distribution list (subscribe): [email protected]
------------------------------------------------------------------------------
How ServiceNow helps IT people transform IT departments:
1. Consolidate legacy IT systems to a single system of record for IT
2. Standardize and globalize service processes across IT
3. Implement zero-touch automation to replace manual, redundant tasks
http://pubads.g.doubleclick.net/gampad/clk?id=51271111&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
------------------------------------------------------------------------------
How ServiceNow helps IT people transform IT departments:
1. Consolidate legacy IT systems to a single system of record for IT
2. Standardize and globalize service processes across IT
3. Implement zero-touch automation to replace manual, redundant tasks
http://pubads.g.doubleclick.net/gampad/clk?id=51271111&iu=/4140/ostg.clktrk
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
