Is anyone using DNAT to balance an l4nat farm on ZLB ver 3.03? I have my load balancer set up with two interfaces eth0 and eth1.
so for example I have: eth0 with and ip of 1.1.1.1 virtual ip eth0:0 with ip of 1.1.1.2 eth1 with and ip of 1.1.2.1 this interface uses a different subnet then eth0. farm1 has is using the virtual ip of 1.1.1.2(eth0:0) and has three backends 1.1.2.2, 1.1.2.3, 1.1.2.4 with their gateways set to 1.1.2.1 (eth1). the farm is set to allow a number of select ports however, when i set the farm to DNAT a port scan of eth0:0 (1.1.1.2) only returns the ports 22 and 444 a port scan with the farm set to NAT returns all of the ports I have specified in the farm. Why does DNAT not allow me to see the ports I have specified in the farm? thanks, JH This e-mail and any attachments may contain confidential material that may not be disclosed, copied or distributed. If you are not the intended recipient(s), please contact the sender and delete all copies. ------------------------------------------------------------------------------ _______________________________________________ Zenloadbalancer-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
