I have two physical interfaces setup: eth0 and eth1

eth0 is setup as 1.1.1.0/21
this interface also has one virtual ip eth0:0 1.1.1.1/21

eth1 is setup as 2.2.2.0/29 and has no virtual ip. 
this is programed as the Gateway in the backend server.



On Aug 28, 2014, at 7:48 AM, Laura Garcia <[email protected]> wrote:

> Hi Jon, your farm is perfectly configured with 1 backend. What about the 
> network configuration you've set in your zlb?
> 
> 
> On Thu, Aug 28, 2014 at 3:08 PM, Jon Hoffart <[email protected]> wrote:
> netstat -L provides a result of invalid option — ‘L’
> 
> are you sure that the commands are netstat and not iptables. Iptables returns 
> the following
> 
> 
> iptables -L -t nat
> 
> Chain PREROUTING (policy ACCEPT)
> target     prot opt source               destination
> DNAT       tcp  --  anywhere             anywhere            mark match 0x200 
> recent: SET name: _mail_0x200_sessions side: source /*  FARM_mail_0_  */ 
> to:2.2.2.4
> 
> Chain POSTROUTING (policy ACCEPT)
> target     prot opt source               destination
> 
> Chain OUTPUT (policy ACCEPT)
> target     prot opt source               destination
> 
> 
> iptables -L -t mangle
> 
> Chain PREROUTING (policy ACCEPT)
> target     prot opt source               destination
> MARK       tcp  --  anywhere             1.1.1.1     statistic mode random 
> probability 1.000000 multiport dports 
> imap2,imaps,pop3,pop3s,smtp,ssmtp,submission,6099 /*  FARM_mail_0_  */ MARK 
> set 0x200
> MARK       tcp  --  anywhere             1.1.1.1     recent: CHECK seconds: 
> 120 name: _mail_0x200_sessions side: source multiport dports 
> imap2,imaps,pop3,pop3s,smtp,ssmtp,submission,6099 /*  FARM_mail_0_  */ MARK 
> set 0x200
> 
> Chain INPUT (policy ACCEPT)
> target     prot opt source               destination
> 
> Chain FORWARD (policy ACCEPT)
> target     prot opt source               destination
> 
> Chain OUTPUT (policy ACCEPT)
> target     prot opt source               destination
> 
> Chain POSTROUTING (policy ACCEPT)
> target     prot opt source               destination
> 
> 
> 
> 
> 
> On Aug 28, 2014, at 2:05 AM, Laura Garcia <[email protected]> wrote:
> 
> > Hi Jon, could you please to paste the output of the following commands?
> >
> > netstat -L -t nat
> > netstat -L -t mangle
> >
> > Additionally, which version are you using?
> >
> > Regards
> >
> >
> >
> > On Wed, Aug 27, 2014 at 8:13 PM, Jon Hoffart <[email protected]> 
> > wrote:
> > Alright here is what I have setup
> >
> > 1 L4xNAT farm with ip of 1.1.1.1
> > protocol type tcp
> > nat type DNAT
> > load balance algorithm Weight
> > persistence mode IP persictence
> >
> > 3 backend servers on a separate subnet
> > 2.2.2.1
> > 2.2.2.2
> > 2.2.2.3
> >
> > gateways on these are set to 2.2.2.4 which is a second interface on my load 
> > balancer.
> >
> > so something like this Client 1.1.1.100/21 —> ZEN 1.1.1.102/21 —> Server 
> > 2.2.2.1/29
> >
> >
> > On Aug 27, 2014, at 10:22 AM, Gruber Alexander 
> > <[email protected]> wrote:
> >
> > > Hi,
> > >
> > > we need a lite bit more information.
> > >
> > > Backendservers on a different network/sub network?Like this?
> > >
> > > Client --192.168.0.0/24 --> ZEN -- 192.168.1.0/24 --> Server
> > >
> > >> Am 27.08.2014 um 18:00 schrieb "Jon Hoffart" <[email protected]>:
> > >>
> > >> Hello,
> > >>   I currently have a L4xNAT farm setup to balance my mail servers. I am 
> > >> trying to use DNAT so I can identify were traffic is coming from, as NAT 
> > >> shows all traffic coming from the load balancer and not its original 
> > >> source. My issue with DNAT is that when I set the farm to use it I am 
> > >> unable to send or receive mail. I also tried running a port scan on the 
> > >> farms IP with DNAT enabled and it doesn’t return any open ports. Any 
> > >> ideas on what my cause an issue like this?
> > >>
> > >> Yes my backend servers have their gateway set to that of the load 
> > >> balancer.
> > >>
> > >>
> > >>
> > >> This e-mail and any attachments may contain confidential material that 
> > >> may not be disclosed, copied or distributed.  If you are not the 
> > >> intended recipient(s), please contact the sender and delete all copies.
> > >>
> > >> ------------------------------------------------------------------------------
> > >> Slashdot TV.
> > >> Video for Nerds.  Stuff that matters.
> > >> http://tv.slashdot.org/
> > >> _______________________________________________
> > >> Zenloadbalancer-support mailing list
> > >> [email protected]
> > >> https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
> > >
> > > ------------------------------------------------------------------------------
> > > Slashdot TV.
> > > Video for Nerds.  Stuff that matters.
> > > http://tv.slashdot.org/
> > > _______________________________________________
> > > Zenloadbalancer-support mailing list
> > > [email protected]
> > > https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
> >
> >
> > This e-mail and any attachments may contain confidential material that may 
> > not be disclosed, copied or distributed.  If you are not the intended 
> > recipient(s), please contact the sender and delete all copies.
> >
> > ------------------------------------------------------------------------------
> > Slashdot TV.
> > Video for Nerds.  Stuff that matters.
> > http://tv.slashdot.org/
> > _______________________________________________
> > Zenloadbalancer-support mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
> >
> > ------------------------------------------------------------------------------
> > Slashdot TV.
> > Video for Nerds.  Stuff that matters.
> > http://tv.slashdot.org/_______________________________________________
> > Zenloadbalancer-support mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
> 
> 
> This e-mail and any attachments may contain confidential material that may 
> not be disclosed, copied or distributed.  If you are not the intended 
> recipient(s), please contact the sender and delete all copies.
> 
> ------------------------------------------------------------------------------
> Slashdot TV.
> Video for Nerds.  Stuff that matters.
> http://tv.slashdot.org/
> _______________________________________________
> Zenloadbalancer-support mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
> 
> ------------------------------------------------------------------------------
> Slashdot TV.  
> Video for Nerds.  Stuff that matters.
> http://tv.slashdot.org/_______________________________________________
> Zenloadbalancer-support mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support


This e-mail and any attachments may contain confidential material that may not 
be disclosed, copied or distributed.  If you are not the intended recipient(s), 
please contact the sender and delete all copies.

------------------------------------------------------------------------------
Slashdot TV.  
Video for Nerds.  Stuff that matters.
http://tv.slashdot.org/
_______________________________________________
Zenloadbalancer-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support

Reply via email to